32REL-B IO card Settings and Configuration

INDUSTRIAL COMPUTER SOURCE

32REL-B

Card Type
Relay Output Adapter
I/O Options
Serial port
Data Bus
8-bit ISA
Card Size
Full-length

CONNECTIONS
Function
Label
Function
Label
DB-37 connector
P5
CAB/32REL-B connector
P4

USER CONFIGURABLE SETTINGS
Function
Label
Position

Factory configured - do not alter
C1
Undefined

Factory configured - do not alter
R2
Undefined

Factory configured - do not alter
R3
Undefined
»
Connects +5 VDC
JP1
Pins 1 & 2 closed

Connects +12 VDC
JP1
Pins 2 & 3 closed

Connects B-side of the relay banks to ground at the on-board DB-37
P1 & P2
All closed

Places the A-side of each relay at the on-board DB-37 and the B-side at the optional cable’s DB-37
P1 & P2
All open

BASE I/O ADDRESS SELECTION
Address
SW1/1
SW1/2
SW1/3
SW1/4
SW1/5
SW1/6

280h
On
On
On
On
Off
On

288h
Off
On
On
On
Off
On

2A0h
On
On
Off
On
Off
On
»
300h
On
On
On
On
On
Off

328h
Off
On
Off
On
On
Off

330h
On
Off
Off
On
On
Off

3E0h
On
On
Off
Off
Off
Off

3F8h
Off
Off
Off
Off
Off
Off
Note:
A total of 64 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/6 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: SW1/6=256, SW1/5=128, SW1/4=64, SW1/3=32, SW1/2=16, SW1/1=8. Turn off the switches and add the values of the switches, including an additional value of 512 as a fixed setting, to obtain the correct memory address. (Off=1, On=0)

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

32REL-B IO card Settings and Configuration

Search

My Books

Discover

Card Type	Relay Output Adapter
I/O Options	Serial port
Data Bus	8-bit ISA
Card Size	Full-length

CONNECTIONS
Function	Label	Function	Label
DB-37 connector	P5	CAB/32REL-B connector	P4

USER CONFIGURABLE SETTINGS
Function		Label	Position
	Factory configured - do not alter	C1	Undefined
	Factory configured - do not alter	R2	Undefined
	Factory configured - do not alter	R3	Undefined
»	Connects +5 VDC	JP1	Pins 1 & 2 closed
	Connects +12 VDC	JP1	Pins 2 & 3 closed
	Connects B-side of the relay banks to ground at the on-board DB-37	P1 & P2	All closed
	Places the A-side of each relay at the on-board DB-37 and the B-side at the optional cable’s DB-37	P1 & P2	All open

BASE I/O ADDRESS SELECTION
Address		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6
	280h	On	On	On	On	Off	On
	288h	Off	On	On	On	Off	On
	2A0h	On	On	Off	On	Off	On
»	300h	On	On	On	On	On	Off
	328h	Off	On	Off	On	On	Off
	330h	On	Off	Off	On	On	Off
	3E0h	On	On	Off	Off	Off	Off
	3F8h	Off	Off	Off	Off	Off	Off
Note: A total of 64 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/6 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: SW1/6=256, SW1/5=128, SW1/4=64, SW1/3=32, SW1/2=16, SW1/1=8. Turn off the switches and add the values of the switches, including an additional value of 512 as a fixed setting, to obtain the correct memory address. (Off=1, On=0)