IPCIDDEC IO card Settings and Configuration
DECISION COMPUTER INTERNATIONAL CO., LTD.
IPCIDDEC
Card Type | Data acquisition |
Chipset | Unidentified |
I/O Options | Serial port, input device port, relay output connector, expansion connector |
Data Bus | Serial |
CONNECTIONS | |||
Function | Label | Function | Label |
Serial port to DTE | P1 | Relay output | P5 |
Auxiliary serial port | P2 | Expansion connector | P6 |
Trigger for successfully read data | P3 | +5V DC power in | P7 |
Input device connector (see pinout below) | P4 | ||
P4 PINOUT | |||
Function | Pin | Function | Pin |
+5V DC out | 1 | +5V DC out | 9 |
+5V DC out | 2 | +5V DC out | 10 |
Bar code reader signal 1 in | 3 | Card reader Card Loaded Signal 1 in | 11 |
Bar code reader signal 2 in | 4 | Card reader Card Loaded Signal 2 in | 12 |
Ground | 5 | Card reader Card Clock Signal 1 in | 13 |
Ground | 6 | Card reader Card Clock Signal 2 in | 14 |
Ground | 7 | Card reader Card Data Signal 1 in | 15 |
Ground | 8 | Card reader Card Data Signal 2 in | 16 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Watchdog timer disabled | JP1 | Open |
Watchdog timer enabled | JP1 | Closed | |
MISCELLANEOUS TECHNICAL NOTES |
This card is designed to be used with Decision Computer International Co., Ltd.’s IPCCPU board. See this document for more information. |
My Books
