INTELLICON-NT960 IO card Settings and Configuration

Card Type	Serial card
Chip Set	Intel 80960 RISC
Maximum Onboard Memory	2MB SRAM/256KB Dual Ported RAM
I/O Options	Serial ports (128 on external modules)
Data Bus	16-bit ISA

CONNECTIONS
Function	Label
37-pin serial port connector	CN1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	8-bit data transfer mode enabled	J12	Open
	16-bit data transfer mode enabled	J12	Closed
»	Factory configured - do not alter	SW2/6	On
»	Factory configured - do not alter	SW2/7	On
»	Factory configured - do not alter	SW2/8	On

I/O ADDRESS SELECTION
Address		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6	SW1/7	SW1/8
»	300h	On	On	On	On	On	On	Off	Off
	100h	On	On	On	On	On	On	Off	On
	104h	Off	On	On	On	On	On	Off	On
	108h	On	Off	On	On	On	On	Off	On
	10Ch	Off	Off	On	On	On	On	Off	On
	110h	On	On	Off	On	On	On	Off	On
	3ECh	Off	Off	On	Off	Off	Off	Off	Off
	3F0h	On	On	Off	Off	Off	Off	Off	Off
	3F4h	Off	On	Off	Off	Off	Off	Off	Off
	3F8h	On	Off	Off	Off	Off	Off	Off	Off
	3FCh	Off	Off	Off	Off	Off	Off	Off	Off
Note: A total of 192 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. Switch SW1/8 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: switch SW1/8=512, SW1/7=256, SW1/6=128, SW1/5=64, SW1/4=32, SW1/3=16, SW1/2=8, SW1/1=4. Turn off the switches and add the values of the switches that are off to obtain the correct memory address. (Off=1, On=0)

BASE ADDRESS SELECTION
Address		SW2/1	SW2/2	SW2/3	SW2/4	SW2/5
»	D0000h	On	On	On	Off	On
	C0000h	On	On	On	On	On
	C2000h	Off	On	On	On	On
	C4000h	On	Off	On	On	On
	C6000h	Off	Off	On	On	On
	C8000h	On	On	Off	On	On
	F6000h	Off	Off	On	Off	Off
	F8000h	On	On	Off	Off	Off
	FA000h	Off	On	Off	Off	Off
	FC000h	On	Off	Off	Off	Off
	FE000h	Off	Off	Off	Off	Off
Note: A total of 32 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. Switch SW1/5 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: switch SW1/5=8192, SW1/4=4096, SW1/3=2048, SW1/2=1024, SW1/1=512. Turn off the switches and add the values of the switches that are off to obtain the correct memory address. (Off=1, On=0)

INTERRUPT SELECTION
IRQ		J1/A	J1/B	J1/C	J1/D	J1/E	J2/A
»	10	Open	Open	Open	Open	Closed	Open
	2/9	Open	Open	Open	Open	Open	Open
	3	Open	Open	Open	Open	Open	Closed
	4	Open	Open	Open	Open	Open	Open
	5	Open	Open	Open	Open	Open	Open
	6	Open	Open	Open	Open	Open	Open
	7	Open	Open	Open	Open	Open	Open
	11	Open	Open	Open	Closed	Open	Open
	12	Open	Open	Closed	Open	Open	Open
	14	Closed	Open	Open	Open	Open	Open
	15	Open	Closed	Open	Open	Open	Open

INTERRUPT SELECTION (CON’T)
IRQ		J2/B	J2/C	J2/D	J2/E	J2/F
»	10	Open	Open	Open	Open	Open
	2/9	Open	Open	Open	Open	Closed
	3	Open	Open	Open	Open	Open
	4	Closed	Open	Open	Open	Open
	5	Open	Closed	Open	Open	Open
	6	Open	Open	Closed	Open	Open
	7	Open	Open	Open	Closed	Open
	11	Open	Open	Open	Open	Open
	12	Open	Open	Open	Open	Open
	14	Open	Open	Open	Open	Open
	15	Open	Open	Open	Open	Open

SRAM CONFIGURATION

Note: The exact configuration of memory is unidentified.

DUAL PORTED RAM CONFIGURATION

Note: The exact configuration of memory is unidentified.