COPY II PC OPTION BOARD IO card Settings and Configuration

Card Type	Floppy enhancer
Chipset	Central Point Software TransCopy
I/O Options	Floppy drive daisy-chain ports
Data Bus	8-bit ISA
Floppy Drives Supported	Two 360KB drives

CONNECTIONS
Function	Label	Function	Label
34-pin floppy drive connector	J2	Card-edge floppy connector	J3

DMA CHANNEL
Setting		J6/A	J6/B
	DMA1	Pins 2 & 3 closed	Pins 2 & 3 closed
»	DMA2	Pins 1 & 2 closed	Pins 1 & 2 closed

FLOPPY CONNECTOR CONFIGURATION
J2	J3	J4/A	J4/B	J5/A	J5/B
From controller	To drive	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2
To drive	From controller	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3
Note:Pins designated are in the closed position.

MISCELLANEOUS TECHNICAL NOTES

On different versions of this card, jumpers may be in different locations than pictured above.