PCD-XX-211 IO card Settings and Configuration
CARRY COMPUTER ENGINEERING CO., LTD.
PCD-XX-211
Card Type | PCMCIA slot controller |
Chip Set | Unidentified |
Maximum Onboard Memory | N/A |
I/O Options | PCMCIA interface |
Data Bus | 16-bit ISA |
Floppy drives supported | None |
CONNECTIONS | ||||||
Function | Label | Function | Label | |||
50-pin interface connector to drive unit | CN1 | PCMCIA Slot | JP5 | |||
26-pin interface connector to drive unit | CN2 |
|
| |||
Note: Both interface connectors are proprietary and are used with PCMCIA drive unit. | ||||||
MULTI-CARD CONFIGURATION | ||||
Setting | Controller Slot # | Drive Slot # | JP3 | JP4 |
í Card is first in system | 1 | 0 | Pins 2 & 3 closed | Pins 2 & 3 closed |
Card is second in system | 3 | 2 | Pins 2 & 3 closed | Pins 1 & 2 closed |
Card is third in system | 5 | 4 | Pins 1 & 2 closed | Pins 2 & 3 closed |
Card is fourth in system | 7 | 6 | Pins 1 & 2 closed | Pins 1 & 2 closed |
MISCELLANEOUS TECHNICAL NOTES |
Note : The PCD-XX-211 slot controller is a controller card for a PCMCIA drive which has one slot and mounts in a standard floppy bay. Multiple PCD-XX-211 controller cards may be installed in a system. JP3 & JP4 must be reset to designate a unique number for each controller and drive slot. |
My Books
