P H D - 1 0 0 0 P O R T A B L E WESTERN DIGITAL
Native| Translation
------+-----+-----+-----
Form 3"/SUPERSLIMLINE Cylinders | 2100| |
Capacity form/unform 1083/ MB Heads 4| 16| |
Seek time / track 14.0/ 4.0 ms Sector/track | 63| |
Controller PCMIDE 50-PIN Precompensation
Cache/Buffer 128 KB DRAM Landing Zone
Data transfer rate 4.000 MB/S int Bytes/Sector 512
16.600 MB/S ext PIO4
Recording method GCR8/9PRML operating | non-operating
-------------+--------------
Supply voltage 5 V Temperature *C 5 55 | -40 60
Power: sleep 0.1 W Humidity % 8 85 | 5 95
standby 0.2 W Altitude km -0.300 3.000| -0.300 12.000
idle 0.9 W Shock g 100 | 300
seek 3.0 W Rotation RPM 4536
read/write 3.0 W Acoustic dBA 43
spin-up 5.0 W ECC Bit REED SOLOMON,SMART
MTBF h 300000
Warranty Month 36
Lift/Lock/Park YES Certificates CSA,FCC,IEC950,ISO9001,TUV...
WESTERN PHD1000 TECHNICAL REFERENCE GUIDE 2/12/96 79-860022-000
+---------------------------------------------------------+ | |XX | |XX2 | |XX | |XX | |XX | |XX | |XX | |XX | 1 26 | | | | | | | | | | +---------------------------------------------------------+
Drive Connector
+--------------------------------------------------1--+
|25* * * * * * * * * * * * * * * * * * * * * * * * * |
++ * * * * * * * * * * * * * * * * * * * * * * * * * ++
+50-----------------------------------------------26+
24 = VCC1 5V
49 = VCC2 5V
41 = CSEL (Cable Select)
23 = DASP- (Drive Active/Slave Present
WESTERN PHD1000 TECHNICAL REFERENCE MANUAL 79-860022-000 2/12/96
Jumper Setting
==============
Drive Configuration
-------------------
All configurations of the WD Portfolio drive use CSEL line to
dictate the master or slave drive identify.
The drive address is 0 (Master or Single) if CSEL is low, or 1
(Slave) if CSEL is high.
NOTE
The WD Portfolio drive autodetects whether it is a master or slave
when CSEL is driven low.
Drive Active/Slave Present
--------------------------
Pin 23
This open collector output is a time-multiplexed signal indicating
drive active or slave present. At reset, this signal is an output
from the slave drive and an input to the master drive, showing that
a slave drive is present. For all times other than reset, DASP- is
asserted by the master and slave drives during command execution.
WESTERN PHD1000 TECHNICAL REFERENCE GUIDE 2/12/97 79-860022-000
Notes On Installation
=====================
Connectors
-----------
Mating connector: AMP P/N 146375-1 or equivalent.
Host Connector Pin Lengths
--------------------------
The following are recommended pin lengths for the host connector.
- Long (0.197 inch / 5.0 mm)
- Medium (0.167 inch 4.25 mm)
- Short (0.138 inch / 3.5 mm)
Long pins are used for power and ground pins. Medium pins are used
for all of the standard IDE interface pins. Short pins are used for
Device Enable, Insert-, and Lock-.
WESTERN PHD1000 TECHNICAL REFERENCE MANUAL 79-860022-000 2/12/96
General Description
-------------------
The WD Portfolio Enhanced IDE hard drive provides 1.0 GB of formatted
storage in a revolutionary low-profile (10.5 mm high) 3-inch form
factor. It is a versatile, low-cost storage solution - ideal for use
in full-size and slimline notebooks.
The WD Portfolio hard drive redefines the concept of upgradable
storage. Unlike other hard drives, all of the WD Portfolio's
electronics are encased in a sealed system, which means you no
longer have to worry about damage caused by electro-static discharge
(ESD).