lotus

previous page: Hard Drive: TOSHIBA: MK-1022FC 22MB 2.5"/SSL   IDE / AT
  
page up: Hard Drive Specs from TOSHIBA
  
next page: Hard Drive: TOSHIBA: MK-1122FC 43MB 2.5"/SSL   IDE / AT

Hard Drive: TOSHIBA: MK-1034FC 106MB 3.5"/SL IDE / AT




M K - 1 0 3 4 F C    TOSHIBA
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders    1354|  664|     |
Capacity form/unform   106/      MB        Heads           4|    8|     |
Seek time   / track  16.0/ 5.0 ms          Sector/track   40|   39|     |
Controller           IDE / AT              Precompensation
Cache/Buffer            64 KB              Landing Zone
Data transfer rate    1.600 MB/S int       Bytes/Sector      512
                      5.900 MB/S ext
Recording method     RLL 2/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C           50    |    -40 60
Power: sleep              W     Humidity     %                 |
       standby        0.5 W     Altitude    km                 |
       idle           2.5 W     Shock        g         5       |     75
       seek           4.8 W     Rotation   RPM      3400
       read/write     3.5 W     Acoustic   dBA
       spin-up       12.0 W     ECC        Bit   32,56
                                MTBF         h      80000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

TOSHIBA MK-1034FC PRODUCT DESCRIPTION

  +---------------------------------------------------------+
  |                                                         |XX Power
  |                                                         |XX 4 Pin
  |                                                         |
  |                                                         |XX I
  |                                                         |XX N
  |1-+PJ4                                                   |XX T PJ11
  || |                                                      |XX E
  || |                                                      |XX R
  |+-+                                                      |XX F
  |                                                         |XX A
  |                                                         |XX C
  |                                                         |XX E
  |                                                         |XX
  |                                                         |XX
  |                                                         |
  |                                                         |XX Power
  +---------------------------------------------------------+   3 Pin

Jumpers

TOSHIBA MK1034FC PRODUCT DESCRIPTION

Jumper Setting
==============

 +--------------------------------------------------+
 | +-------+                            +---------+ |
 | | o o o |  xxxxxxxxxxxxxxxxxxxxxxxx  | o o o o | |
 +-+-1-2-3-+----------------------------+-4-3-2-1-+-+
     | | +--- +5V                         | | | +--- +12 VDC
     | +----- +12V                        | | +----- +12V Return
     +------- +GND                        | +------- +5V Return
                                          +--------- +5 VDC

 PJ4 LED/Slave Present/Master/Slave/Drive Present/ECC/Auto Start
 ---------------------------------------------------------------
                 +-----+
                 1 o o 2   LED
                 | o o |   SLV PRS
                 5 o o 6   MST/SLV
                 | o o |   DRV PRS
                 9 o o 10  ECC
                 | o o |   DIS Auto Start
                 +-----+

 PJ4  LED
 --------
     1-2   CLOSED  Connects the active signal to the HOST SLAVE/ACTIVE
                   signal (PJ11-39) on the interface connector.
                   This signal provides the capability to drive an
                   external LED. An external current limiting resistor
                   is required.

 PJ4  Slave Present
 ------------------
      3-4  CLOSED  The HOST SLAVE/ACTIVE signal (PJ11-39) on the
                   interface to the ground for the systems that
                   require the slave drive to provide SLAVE PRESENT
                   signal from the slave drive to a 2-drive system.
                   This jumper PJ4-3/4 and PJ4-1/2 are mutually
                   exclusive. Use should not install both jumpers.

 PJ4  Master/Slave
 -----------------
      5-6  CLOSED  Drive is Master
           OPEN    Drive is Slave

 PJ4  Slave Drive Present
 ------------------------
      7-8  CLOSED  Slave drive is present

In a 2-drive system, this jumper must be installed in the Master
drive.

 PJ4  ECC
 --------
      9-10 CLOSED  4-Bytes ECC mode on Read and Write Long commands.
           OPEN    7-Bytes ECC

 PJ4  DIS Auto Start
 -------------------
      11-12 CLOSED  The drive will be in STANDBY mode after power
                    on. This means the spindle motor will not rotate
                    and only the interface part is functioning. The
                    drive will spin-up when a command is executed. The
                    Auto Standby mode is not enabled by this jumper.
            OPEN    The drive will be in Idle-1 mode after power on.













TOP
previous page: Hard Drive: TOSHIBA: MK-1022FC 22MB 2.5"/SSL   IDE / AT
  
page up: Hard Drive Specs from TOSHIBA
  
next page: Hard Drive: TOSHIBA: MK-1122FC 43MB 2.5"/SSL   IDE / AT