Hard Drive: SEAGATE: ST9295AG 261MB 2.5"/SSL IDE / AT

S T 9 2 9 5 A G    SEAGATE
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 2.5"/SUPERSLIMLINE    Cylinders    1024|     |     |
Capacity form/unform   261/      MB        Heads          16|     |     |
Seek time   / track  16.0/ 5.0 ms          Sector/track   63|     |     |
Controller           IDE / AT              Precompensation
Cache/Buffer           120 KB              Landing Zone
Data transfer rate    2.500 MB/S int       Bytes/Sector      512
                      4.000 MB/S ext
Recording method     RLL 2/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5 V          Temperature *C         5 55    |    -40 70
Power: sleep          0.2 W     Humidity     %                 |
       standby        0.2 W     Altitude    km                 |
       idle           0.7 W     Shock        g       100       |    150
       seek           1.8 W     Rotation   RPM      3450
       read/write     1.8 W     Acoustic   dBA
       spin-up            W     ECC        Bit
                                MTBF         h     300000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

SEAGATE ST9080A/9100AG/9235AG/9235A/9295AG PRODUCT DESCRIPTION

  +---------------------------------------------------------+
  |                                                         |XX
  |                                                         |XX 44-pin
  |                                                         |XX I
  |                                                         |XX N
  |                                                         |XX T
  |                                                         |XX E
  |                                                         |*X R
  |                                                         |XX F
  |                                                         |XX A
  |                                                         |XX C
  |                                                         |XX E
  |                                                         |XX1
  |                                                         |+-+
  +---------------------------------------------------------++-+
                                                            Master/
                                                            Slave

Jumpers

SEAGATE ST9080A/9100AG/9295AG/9235AG/9235A PRODUCT DESCRIPTION

Jumper Setting
==============

 Master/Slave selection
 ----------------------
    Interface                              J1      Jumper
   +-------------------------------------------+   +------+
   |o o o o o o o o o o o o o o o o o o o o o 1|   | A  C |
   |o o o o o o o o o o o o * o o o o o o o o o|   | B  D |
   44------------------------------------------+   +------+
 -----------------------------------------------------------

 Pin 41   +5VDC
 Pin 42   +5VDC
 Pin 43   GND
 Pin 44   Reserved

   Jumper for Pins        Configuration
   A and B   C and D
   ------------------------------------------------------------------
   OPEN      OPEN       Drive is Master, no Slave present
   CLOSED    OPEN       Drive is Master, Seagate Slave drive present
   OPEN      CLOSED     Drive is Slave to another Seagate 2.5" Master
   CLOSED    CLOSED     Reserved Position (Do not use)