S T 9 2 3 5 N G SEAGATE
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 2.5"/SLIMLINE Cylinders 985| | |
Capacity form/unform 209/ MB Heads 13| | |
Seek time / track 16.0/ 5.0 ms Sector/track 32| | |
Controller SCSI1 SINGLE-ENDED Precompensation
Cache/Buffer 64 KB Landing Zone
Data transfer rate 4.000 MB/S int Bytes/Sector 512
5.000 MB/S ext
Recording method RLL 2/7 operating | non-operating
-------------+--------------
Supply voltage 5 V Temperature *C 5 55 | -40 70
Power: sleep 0.2 W Humidity % |
standby 0.2 W Altitude km |
idle 0.1 W Shock g 10 | 150
seek 1.8 W Rotation RPM 3450
read/write 1.8 W Acoustic dBA
spin-up W ECC Bit
MTBF h 150000
Warranty Month
Lift/Lock/Park YES Certificates
SEAGATE ST9235NG JUMPER SETTING
+- 40-pin I/O Connector (* see below)
TOP |
| 1
+--------------------+ o o o o
----P-W-A-+:::::::::::.:::::::1+--* * * *
+-----------+--------+
pin-17 removed for keying ----------------+
Pin assignments for the Seagate 2.5" drive SCSI interface connector
(signal) (pin) (signal)
+----------+ pin
RESERVED (NC) | 1 2 | RESERVED (ND) ID1 ID2 ID4
RESERVED (NC) | 3 4 | RESERVED (ND) ID+-----------
ID1- | 5 6 | ID2- 0 | H H H
ID4- | 7 8 | LED 1 | L H H
+----------+ 2 | H L H
+----------+ 3 | L L H
+5V | 1 2 | +5V 4 | H H L
+5V Ret | 3 4 | +5V Ret 5 | L H L
Ground | 5 6 | DB0- 6 | H L L
Ground | 7 8 | DB1- 7 | L L L
Ground | 9 10| DB2-
Ground | 11 12| DB3- H = high
Ground | 13 14| DB4- L = low
Ground | 15 16| DB5-
Connector Key | no pin 18| DB6-
Ground | 19 20| DB7-
Ground | 21 22| Parity-
Ground | 23 24| TRMPWR
ATN- | 25 26| BSY-
Ground | 27 28| ACK-
RST- | 29 30| MSG-
Ground | 31 32| SEL-
I/O- | 33 34| C/D-
Ground | 35 36| REQ-
+5V Ret | 37 38| +5V Ret
+5V | 39 40| +5V
+----------+