S T 4 3 7 6 N SEAGATE
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 5.25"/HH Cylinders 1549| | |
Capacity form/unform 330/ 376 MB Heads 9| | |
Seek time / track 17.5/ 4.0 ms Sector/track | | |
Controller SCSI1 SINGLE-ENDED Precompensation
Cache/Buffer 32 KB Landing Zone
Data transfer rate 1.875 MB/S int Bytes/Sector 512
4.700 MB/S ext SYNC
Recording method RLL 2/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C |
Power: sleep W Humidity % |
standby W Altitude km |
idle W Shock g |
seek 27.0 W Rotation RPM 3600
read/write W Acoustic dBA
spin-up W ECC Bit
MTBF h 100000
Warranty Month
Lift/Lock/Park YES Certificates
SEAGATE ST4350N/ST4376N JUMPER SETTING
Jumper Setting
==============
Connects CHASIS ground to ground lug ------------+
Connects SIGNAL ground to ground lug ----------+ |
Drive Select ID's -----+ | |
Motor Start Option enable -+ | G G
Parity Check Option enable+ | +-+-+ +1+2+
+P M 4 2 1+|o|o| POWER
|o o o o o||o|o| +---------+
|o o o o o|+-+-+ | O O O O |
------------------------------------+---------+--------+---------PWA-
-+------+---+-------------------------+--------+--------+--Data-PWA--
1------+ |XXXXXXXXXXXXXXXXXXXXXXXXX| +-+ 1--------+
Terminator +------------------------1+ |o| o Terminator
INTERFACE |o+-o
+++
TERMPWR (+5v) from drive (vertical) -----+
TERMPWR from the Bus (lower horizontal)