S T 3 0 9 6 A SEAGATE NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | 1024| | Capacity form/unform 89/ MB Heads 3| 10| | Seek time / track 14.0/ 3.0 ms Sector/track | 17| | Controller IDE / AT Precompensation Cache/Buffer 32 KB Landing Zone Data transfer rate 1.500 MB/S int Bytes/Sector 512 4.000 MB/S ext Recording method RLL 2/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C | Power: sleep 0.7 W Humidity % | standby 0.7 W Altitude km | idle 2.1 W Shock g 10 | 75 seek 5.3 W Rotation RPM 3211 read/write W Acoustic dBA spin-up W ECC Bit 32 MTBF h 150000 Warranty Month 12 Lift/Lock/Park YES Certificates
SEAGATE ST3096/3120/3144-A DRIVE INSTALLATION GUIDE 36169-001, REV.B
+---------------------------------------------------------+ | User +-------+ |X1 3-Pin |++LED Configuration+-------1 |xx Power |++ Jumper |XX | |XX | |XX 40-Pin | |XX AT | |XX I/O | |.X | |XX | |XX | |XX | |XX | |XX | |XX | | | |XX Power | |X1 4-Pin +---------------------------------------------------------+
SEAGATE ST3096/3120/3144-A DRIVE INSTALLATION GUIDE 36169-001, REV.B
Jumper setting
==============
User Configuration Jumper Block ------------------------------- +-1--3--5--7--9-+ | o o o o o | | o o o o o | +-2--4--6--8--10+
+---------------+ | o X o o o | Drive is Master. | o X o o o | +---------------+ +---------------+ | o o X o o | Slave Present. | o o X o o | +---------------+ +---------------+ | o o o o X | Active LED. The drive will indicate activity to | o o o o X | the system front panel via a connector on the +---------------+ host adapter or system motherboard. +---------------+ | o o o x o | Reserved (DO NOT USE)! | o o o x o | +---------------+ +---------------+ | x o o o o | Reserved (DO NOT USE)! | x o o o o | +---------------+
Drive Type Master Slave Present
--------------------------------------------
Only one drive CLOSED OPEN
in system
--------------------------------------------
Drive 1 in a two CLOSED CLOSED
drive system
--------------------------------------------
Drive 2 in a two OPEN OPEN
drive system
--------------------------------------------
SEAGATE ST3096/3120/3144-A DRIVE INSTALLATION GUIDE 36169-001, REV.B
Drive Mounting
==============
Drive Orientation
-----------------
The drive may be mounted in any orientation. For best results, the
drive should be formatted in its final mounting orientation.
Important Note: Using mounting screws larger than specified maximum
dimensions could damage the drive.
Bottom Mounting
---------------
6-32 UNC screw, 4 places. Maximum length into drive frame: 0.20-inch.
Side Mounting
-------------
6-32 UNC screw, 4 places. Maximum length into drive frame: 0.13 inch.
Seagate's ST3144 Family drives can be installed in laptop systems.
These computers require qualified or factory trained technicans to
perform peripheral upgrades. Be sure to review the terms and
conditions for your system warrenty before opening the system
enclosure. All ST3144 Family drives automatically park their heads
at power-down.
Power Connection
----------------
Connect a system power cable to the drive power connector. The ST3144
Family drives support both 3-pin and 4-pin DC power connector
standards.
Attach AT Interface Cable
-------------------------
Use a 40-pin AT interface connector cable. Pin 20 has been removed on
the connector for keying purposes. A dual-drive system will require
an 40-pin AT interface daisy-chain cable.
Note: Most cables have a colored stripe down one side to designate
the Pin 1 location. Make sure Pin 1 on the interface cable connector
is connected to Pin 1 on the drive interface connector and Pin 1 on
the host connector.
4-Pin DC Power -------------- +----------+ 1 = +12 VDC |1 2 3 4| 2 = +12 Volts Return +----------+ 3 = + 5 Volts Return 4 = + 5 VDC
3-Pin DC Power -------------- +-------+ 1 = + 5 VDC |3 2 1| 2 = +12 VDC +-------+ 3 = Ground
SEAGATE ST3096/3120/3144-A DRIVE INSTALLATION GUIDE 36169-001, REV.B
Low-level formatting
-------------------
Seagate AT Interface drives are low-level formatted at the factory
and do not need low-level formatting. If an installed drive is low-
level formatted, all user data will lost. Seagate Technology assumes
no liability for lost user data.
Installing the ST3283A
----------------------
The table below shows the recommended translation geometry for the
ST3144A Family.
Model MBytes Cylinders R/W Sectors/ CMOS (F) Heads Track MBytes(F) ----------------------------------------------------------- ST3096A 89.1 1,024 10 17 85 ST3096A 89.0 836 8 26 85 ST3120A 106.9 1,024 12 17 102 ST3144A 130.7 1,001 15 17 124
Maintenance and repair
----------------------
Seagate disc drives do not require any preventive maintenance. The
head/disc assembly is sealed and does not contain any user-
serviceable components. Tampering with the factory seal voids the
warranty.
Error Correction
----------------
The ST3144 Family drives use 4 bytes of Error Correction Code (ECC)
with Read/Write Long commands. Based on the drive type, some systems
BIOS will lock for 7 Bytes of ECC. If your system expects 7 bytes of
ECC, some drive diagnostics programs will return false drive failures
Contact your system dealer for information on configuring your
system to receive 4 bytes of ECC.
Power Management
----------------
The ST3144 Family feature four-phase power management with Active,
Idle, Standby and Sleep modes. Power management is required for low-
power portable systems, an dis enabled through a system-dependent
set-up procedure.
SEAGATE SUPPORT SERVICES
Seagate Technology
------------------
Technical Support Services
If you need assistance installing your drive, consult your dealer.
Dealers are familiar with their unique system configurations and can
help you with system conflicts and other technical issues. If you
need additional assistance with your Seagate(r) drive or other
Seagate products, use one of the Seagate technical support services
listed below.
SeaFONE at 1-800-SEAGATE (1-800-732-4283)
Seagate's 800 number allows toll-free access to automated self-help
services, providing answers to commonly asked questions,
troubleshooting tips and specifications for disc drives and tape
drives. This service is available 24 hours daily and requires a
touch-tone phone. If you need to speak to a technical support
engineer, dial this number and listen to the options for technical
support. (International callers can also reach this automated
self-help service by dialing 408-456-4496).
Seagate Technology online services
Using a modem, you can obtain troubleshooting tips, free utility
programs, drive specifications and jumper settings for Seagate's
entire product line. You can also download software for installing
and analyzing your drive.
SeaNET
You can obtain technical information on Seagate drives, Seagate
software and much more over the Internet from Seagate's World Wide
Web home page (http://www.seagate.com) or Seagate's ftp server
(ftp://ftp.seagate.com).
You may also send E-mail with your questions to DiscSupport@
Seagate.com or TapeSupport@Seagate.com.
SeaBOARD
SeaBOARD is a computer bulletin board system (BBS) that contains
information about Seagate's disc and tape drive products and is
available 24 hours daily. Set your communications software to eight
data bits, no parity and one stop bit (8-N-1). SeaBOARD phone numbers
are listed in the following table.
BBS Location Modem number
United States Disc: 408-434-1080; Tape: 408-456-4415
England 44-1628-478011
France 33 1-48 25 35 95
Germany 49-89-140-9331
Singapore 65-292-6973
Thailand 662-531-8111
Australia 61-2-9756-2359
Taiwan 886-2-719-6075
Seagate CompuServe forum
Online technical support for Seagate products is available on
CompuServe. To access our technical support forum, type go seagate.
This forum provides information similar to that found on SeaBOARD.
In addition, you can type questions or browse through previous
questions and answers on the forum messages.
Seagate Technology FAX services
SeaFAX
You can use a touch-tone telephone to access Seagate's automated FAX
system to receive technical support information by return FAX. This
service is available 24 hours daily.
Location Telephone number
United States 1-800-SEAGATE or 408-456-4496
England 44-1628-894084
Australia 61-2-9756-5170
Seagate technical support FAX
You can FAX questions or comments to technical support specialists 24
hours daily. Responses are sent during business hours.
Location FAX number
United States 408-944-9120
England 44-1628-890660
France 33 1-46 04 42 50
Germany 49-89-1430-5100
Australia 61-2-9725-4052
Singapore 65-293-4722
Hong Kong 852-2368 7173
Taiwan 886-2-715-2923
Korea 82-2-556-7294/4251
Seagate technical support
You can talk to a technical support specialist during business hours
Monday through Friday for one-on-one technical help. Before calling,
note your system configuration and drive model number (STxxxx). There
are several technical support phone numbers available for various
Seagate products.
Location Telephone number United States Please dial 1-800-SEAGATE for the specific product telephone number. (6:00 A.M. to 11:15 A.M., 12:30 P.M. to 5:00 P.M., Pacific time, M-F) England 44-1628-894083 (10:00 A.M. to 1:00 P.M., 2:00 P.M. to 5:00 P.M., M-F) France 33 1-41 86 10 86 (9:30 A.M. to 12:30 P.M., 2:00 P.M. to 5:00 P.M., M-F) Germany Disc: 49-89-140-9332; (9:30 A.M. to 12:30 P.M., 2:00 P.M. to 4:00 P.M., M-F) Tape: 49-89-140-9333 Australia 61-2-9725-3366 (9:00 A.M. to 5:00 P.M., M-F) Singapore 65-290-3998 (9:00 A.M. to 12:00 P.M., 2:00 P.M. to 5:00 P.M., M-F) Hong Kong 852-2368 9918 Taiwan 886-2-514-2237 Korea 82-2-556-8241
SeaTDD 408-944-9121
Using a telecommunications device for the deaf (TDD), you can send
questions or comments 24 hours daily and exchange messages with a
technical support specialist between 6:00 A.M. to 11:15 A.M. and
12:30 P.M. to 5:00 P.M. (Pacific time) Monday through Friday.
Customer Service Centers
Seagate direct OEM, Distribution, System Integrator and Retail
customers should contact your Seagate Service Representative for
warranty information. Other customers contact your place of
purchase. Seagate offers comprehensive customer support for all
Seagate drives. Seagate customer service centers are the only
facilities authorized to service Seagate drives. These services are
available worldwide.
Location Telephone number FAX number
United States 1-800-468-3472; 405-949-6740
Other Americas
(Canada & Brazil) 405-949-6706; 405-949-6738
Mexico 525-546-6965; 525-546-4888
Europe, Middle
East & Africa 31-2065-43300; 31-2065-34320
Asia Pacific &
Australia 65-485-3595; 65-485-4980
Japan 81-3-5462-2904; 81-3-3462-2979
Seagate, Seagate Technology and the Seagate logo are registered
trademarks of Seagate Technology, Inc. SeaFAX, SeaFONE, SeaBOARD,
SeaTDD, SeaNET, Medalist and DiscWizard are either trademarks or
registered trademarks of Seagate Technology, Inc. or one of its
subsidiaries. All other trademarks or registered trademarks are the
property of their respective owners.