lotus

previous page: Hard Drive: QUANTUM: QM 32150WSD    ATLAS 2150MB 3.5"/SL    SCSI2 D/W
  
page up: Hard Drive Specs from QUANTUM
  
next page: Hard Drive: QUANTUM: QM 32160STA FIREBALL 2111MB 3.5"/SL    ATA3 ULTRA

Hard Drive: QUANTUM: QM 32160SGA PIONEER 2111MB 3.5"/SL ATA2 FAST




Q M   3 2 1 6 0 S G A     P I O N E E R    QUANTUM
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders        | 4092|     |
Capacity form/unform  2111/      MB        Heads            |   16|     |
Seek time   / track  12.0/ 4.0 ms          Sector/track     |   63|     |
Controller           IDE / ATA2 FAST/ENHA  Precompensation
Cache/Buffer            64 KB              Landing Zone
Data transfer rate   12.625 MB/S int       Bytes/Sector      512
                     16.600 MB/S ext PIO4
Recording method                                    operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C           55    |    -40 65
Power: sleep              W     Humidity     %         5 85    |      5 95
       standby            W     Altitude    km            3.048|        12.192
       idle               W     Shock        g        10       |     70
       seek               W     Rotation   RPM      4500
       read/write         W     Acoustic   dBA        30
       spin-up            W     ECC        Bit   48BIT ON THE FLY,SMART
                                MTBF         h     300000
                                Warranty Month        36
Lift/Lock/Park     YES          Certificates                                  

Layout

QUANTUM PIONEER SG JUMPER SETTING

  +---------------------------------------------------------+
  |                                                         |XX
  |                                                         |XXI
  |                                                         |XXN
  |                                                         |XXT
  |                                                         |XXE
  |                                                         |XXR
  |                                                         |XXF
  |                                                         |XXA
  |                                                         |XXC
  |                                                         |XXE
  |                                                         |XX1
  |                                                         |xx
  |                                                         |xx
  |                                                         |
  |                                                         |XX Power
  |                                                         |XX
  +---------------------------------------------------------+

Jumpers

QUANTUM PIONEER SG JUMPER SETTING

Jumper Setting
==============

                              ATA CABLE PIN+        Not Used
    +--------------------------------------1----------++--------+
    |* * * * * * * * * * * * * * * * * * * *  * * * * *| XXXXXX |
    |* * * * * * * * * *   * * * * * * * * *    * * * *| xxxxxx |
    +--------------------+----------------------+-+-+--+-Power--+
                      Blank key               DS+ | PK
                                                  CS
 Single Drive = DS only
 Master Drive = DS only
 Slave Drive = No Jumpers

Quantum IDE disk drives have multiple jumper setting options and are
used to set specific drive features. The most common settings are
used to define the drive as the primary or secondary drive on the
IDE cable.

Master / Slave
--------------
Quantum IDE drives have additional jumper settings used for optional
features found on the drive. Listed below are the various jumper
options that may be found on Quantum IDE drives and the corresponding
feature that they enable.

DS Jumper - Drive Select
------------------------
Used to identify the drive as the primary (MASTER) drive in a single
or dual drive configuration. This is the factory default setting.

SP Jumper - Slave Present
-------------------------
Used only when the second (SLAVE) drive in a two drive configuration
does not support DASP.

DASP
----
(Drive active / drive 1 present) is a CAM (Common Access Method)
defined signal that indicates the presence of a second drive, DASP is
used during power on initialization and after a reset. Prior to this
definition, products were introduced which did not utilize this
method to detect the presence of a second drive. The SP jumper is
used on the MASTER drive, with the DS jumper, when the second drive
does not support DASP.

CS Jumper - Cable Select
------------------------
Only used in systems that support the cable select feature. Cable
Select allows for each IDE disk drive to be jumped the same and the
position on the cable determines the ID. This requires a special
cable and both drives on the interface would have to support this
feature.

PK Jumper - Park (Spare)
------------------------
This jumper does not enable any feature. It is used, instead, to
provide a spare location to any jumper removed from the drive
during a configuration change.













TOP
previous page: Hard Drive: QUANTUM: QM 32150WSD    ATLAS 2150MB 3.5"/SL    SCSI2 D/W
  
page up: Hard Drive Specs from QUANTUM
  
next page: Hard Drive: QUANTUM: QM 32160STA FIREBALL 2111MB 3.5"/SL    ATA3 ULTRA