lotus

previous page: Hard Drive: QUANTUM: PIONEER SG 2160AT 2111MB 3.5"/SL    ATA2 FAST
  
page up: Hard Drive Specs from QUANTUM
  
next page: Hard Drive: QUANTUM: PRODRIVE 105 S 100MB 3.5"/HH    SCSI1 SE

Hard Drive: QUANTUM: PIONEER SG 3220AT 3200MB 3.5"/SL ATA2 FAST




P I O N E E R   S G   3 2 2 0 A T    QUANTUM
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders        |     |     |
Capacity form/unform  3200/      MB        Heads            |     |     |
Seek time   / track  12.0/     ms          Sector/track     |     |     |
Controller           IDE / ATA2 FAST/ENHA  Precompensation
Cache/Buffer               KB              Landing Zone
Data transfer rate          MB/S int       Bytes/Sector      512
                            MB/S ext
Recording method                                    operating  | non-operating
                                                  -------------+--------------
Supply voltage                  Temperature *C                 |
Power: sleep              W     Humidity     %                 |
       standby            W     Altitude    km                 |
       idle               W     Shock        g                 |
       seek               W     Rotation   RPM
       read/write         W     Acoustic   dBA
       spin-up            W     ECC        Bit
                                MTBF         h
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

QUANTUM PIONEER SG JUMPER SETTING

  +---------------------------------------------------------+
  |                                                         |XX
  |                                                         |XXI
  |                                                         |XXN
  |                                                         |XXT
  |                                                         |XXE
  |                                                         |XXR
  |                                                         |XXF
  |                                                         |XXA
  |                                                         |XXC
  |                                                         |XXE
  |                                                         |XX1
  |                                                         |xx
  |                                                         |xx
  |                                                         |
  |                                                         |XX Power
  |                                                         |XX
  +---------------------------------------------------------+

Jumpers

QUANTUM PIONEER SG JUMPER SETTING

Jumper Setting
==============

                              ATA CABLE PIN+        Not Used
    +--------------------------------------1----------++--------+
    |* * * * * * * * * * * * * * * * * * * *  * * * * *| XXXXXX |
    |* * * * * * * * * *   * * * * * * * * *    * * * *| xxxxxx |
    +--------------------+----------------------+-+-+--+-Power--+
                      Blank key               DS+ | PK
                                                  CS
 Single Drive = DS only
 Master Drive = DS only
 Slave Drive = No Jumpers

Quantum IDE disk drives have multiple jumper setting options and are
used to set specific drive features. The most common settings are
used to define the drive as the primary or secondary drive on the
IDE cable.

Master / Slave
--------------
Quantum IDE drives have additional jumper settings used for optional
features found on the drive. Listed below are the various jumper
options that may be found on Quantum IDE drives and the corresponding
feature that they enable.

DS Jumper - Drive Select
------------------------
Used to identify the drive as the primary (MASTER) drive in a single
or dual drive configuration. This is the factory default setting.

SP Jumper - Slave Present
-------------------------
Used only when the second (SLAVE) drive in a two drive configuration
does not support DASP.

DASP
----
(Drive active / drive 1 present) is a CAM (Common Access Method)
defined signal that indicates the presence of a second drive, DASP is
used during power on initialization and after a reset. Prior to this
definition, products were introduced which did not utilize this
method to detect the presence of a second drive. The SP jumper is
used on the MASTER drive, with the DS jumper, when the second drive
does not support DASP.

CS Jumper - Cable Select
------------------------
Only used in systems that support the cable select feature. Cable
Select allows for each IDE disk drive to be jumped the same and the
position on the cable determines the ID. This requires a special
cable and both drives on the interface would have to support this
feature.

PK Jumper - Park (Spare)
------------------------
This jumper does not enable any feature. It is used, instead, to
provide a spare location to any jumper removed from the drive
during a configuration change.

General

NEVER

                 Announced but never produced.

                        NEVER PRODUCED!!!













TOP
previous page: Hard Drive: QUANTUM: PIONEER SG 2160AT 2111MB 3.5"/SL    ATA2 FAST
  
page up: Hard Drive Specs from QUANTUM
  
next page: Hard Drive: QUANTUM: PRODRIVE 105 S 100MB 3.5"/HH    SCSI1 SE