N D R - 5 0 5 NEWBURY DATA
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 5.25"/FH Cylinders 306| | |
Capacity form/unform 5/ 6 MB Heads 2| | |
Seek time / track 50.0/16.0 ms Sector/track 32| | |
Controller MFM / ST506 Precompensation
Cache/Buffer KB Landing Zone
Data transfer rate 0.625 MB/S int Bytes/Sector 256
0.625 MB/S ext
Recording method MFM operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 10 45 | -40 60
Power: sleep W Humidity % 8 80 | 8 80
standby W Altitude km 3.048| 9.144
idle W Shock g 10 | 30
seek W Rotation RPM 3443
read/write W Acoustic dBA
spin-up W ECC Bit
MTBF h 8000
Warranty Month
Lift/Lock/Park NO Certificates FCC
NEWBURY NDR-505 USER MANUAL 55510066-B
+---------------------------------------------------------+ | |XX J3 | |xx | |XX1 | | | |XX1 | |XX | |XX J1 | |XX | |XX | |XX | | | |XX1 | |XX | |XX J2 | |XX | |XX | | +---------------------------------------------------------+
Front Panel +----------------------------------------------------------------+ | | | +----------------------------------------------------+ | | | | | | +----------------------------------------------------+ | | | | +-----------------------------------------------------+ | | | NEWBURY DATA | | | | RECORDING LIMITED | | | | * LED green * Emergency Unlock * LED red | | | +------------------------+ | | | | +-----+ +-----+ | +---+Unit | | | | |xXXxx|RUN|xXXxx|WRT| | 4 |Number | | | | +-----+ +-----+ | Door Catch +---+ | | +--+ | Run Write Protect xxxx | +---+ +-+-+ Switch Switch | (Push Up) +-+-+ +----------------------------+--------------------------------+
Underside +---------------- ------------------------------------------+ | | | +----+ | | |+-+ |T = 220/330Ohm | | ||T| | Terminator | | || | +-----+ | | |+-1 3***4 |Drive | | | 1***2 |Select Jumper | | +----------+ | | +----------+ | | |+--------+| | | ++ ++ | | |+++++--+++| | +----+ +--------------------------------------------+
NEWBURY NDR-505 USER MANUAL 55510066-B
Jumper Setting
==============
Drive Unit Number Selection
---------------------------
The drive unit number can be set by a jumper link on the underside of
the drive. Always ensure that the unit number stick-on label on the
fron panel agrees with the unit number link setting.
+-----+ +-----+ +-----+ +-----+
3|o o o|4 3|o o o|4 3|xxx o|4 3|o xxx|4
1|xxx o|2 1|o xxx|2 1|o o o|2 1|o o o|2
+-----+ +-----+ +-----+ +-----+
UNIT NO 1 UNIT NO 2 UNIT NO 3 UNIT NO 4
xxx = LINK AMP 531220-2