lotus

previous page: Hard Drive: NEC: D3813 340MB 3.5"/SL    SCSI2 SE
  
page up: Hard Drive Specs from NEC
  
next page: Hard Drive: NEC: D3817 540MB 3.5"/SL    SCSI2 SE

Hard Drive: NEC: D3815 270MB 3.5"/SL SCSI2 SE




D 3 8 1 5    NEC
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders     524|     |     |
Capacity form/unform   270/      MB        Heads          16|     |     |
Seek time   / track  12.0/ 3.0 ms          Sector/track   63|     |     |
Controller           SCSI2 SINGLE-ENDED    Precompensation
Cache/Buffer           256 KB SEGMENTED    Landing Zone
Data transfer rate    6.000 MB/S int       Bytes/Sector      512
                     10.000 MB/S ext SYNC
Recording method                                    operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C                 |
Power: sleep              W     Humidity     %                 |
       standby            W     Altitude    km                 |
       idle           5.0 W     Shock        g                 |
       seek               W     Rotation   RPM      4500
       read/write         W     Acoustic   dBA
       spin-up            W     ECC        Bit
                                MTBF         h     100000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

NEC D3815/3817 JUMPER SETTING

  +---------------------------------------------------------+
  |                                                         |XX
  |                                             SW1+++++++  |XX
  |                                                +++++++  |XX
  |                                                         |XX I/F
  |                                                 +-+     |XX SCSI
  |                                               J4| |     |XX
  |                                                 +-+     |XX
  |                                               RESERVED  |XX
  | +-+                                                     |XX
  | | | J2                                                  |XX
  | | | Optional                                            |XX
  | +-+ Connector                                           |XX
  |+-+                                                      |XX
  |+-+LED                                                   |
  |                                                         |XX POWER
  |                                                         |XX
  +---------------------------------------------------------+

Jumpers

NEC D3815/3817 JUMPER SETTING

Jumper Setting
==============

 SW1                                                  |\
  +-----------------------+ON                 --------+  \
  |+-+ +-+ +-+ +-+ +-+ +-+|                   --------+  /
  ||x| |x| |x| |x| |x| |x||                           |/
  |+-+ +-+ +-+ +-+ +-+ +-+|                    SCSI I/F Connector Side
  +-1---2---3---4---5---6-+OFF
    |   |   |   |   |   +------ SCSI ID 2(0)
    |   |   |   |   +---------- SCSI ID 2(1)
    |   |   |   +-------------- SCSI ID 2(2)
    |   |   +------------------ Parity Check   ON -  CHECK
    |   |                                      OFF - NO CHECK
    |   +---------------------- Start Command  ON -  USE
    |                                          OFF - NONE-USE
    +-------------------------- ALLWAYS SETS OFF

 SW1 SCSI ID
 -----------
   +----------+-----------------------+
   | SCSI ID  |        Jumpers        |
   |          | ID2(2)| ID2(1)| ID2(0)|
   +----------+-------+-------+-------+
   |    0     | OFF   | OFF   | OFF   |
   |    1     | OFF   | OFF   | ON    |
   |    2     | OFF   | ON    | OFF   |
   |    3     | OFF   | ON    | ON    |
   |    4     | ON    | OFF   | OFF   |
   |    5     | ON    | OFF   | ON    |
   |    6     | ON    | ON    | OFF   |
   |    7     | ON    | ON    | ON    |
   +----------+-------+-------+-------+

J4 Connector
------------
All pins Factory use!
DON'T USE!

 J8 LED Connector
 ----------------
        2  1
     +--------+
     |  |  |  |
     +--+--+--+
     ++++-++-++
      +++-++-+
       |   +---- Anode Side
       +-------- Cathode Side

J2 Optional Connector
---------------------

   +-7+--+--+--+--+-2+
   +--+--+--+--+--+--+
  -+14+--+--+--+--+-9+-
  ---------------------
     Solder Side

 J2 SCSI ID (OPTIONAL!)
 ----------------------
   +----------+-----------------------+
   | SCSI ID  |        Jumpers        |
   |          | J2-4  | J2-3  | J2-2  |
   +----------+-------+-------+-------+
   |    0     | OPEN  | OPEN  | OPEN  | When using connector pin all
   |    1     | OPEN  | OPEN  | GND   | switches are set to off!
   |    2     | OPEN  | GND   | OPEN  |
   |    3     | OPEN  | GND   | GND   |
   |    4     | GND   | OPEN  | OPEN  |
   |    5     | GND   | OPEN  | GND   |
   |    6     | GND   | GND   | OPEN  |
   |    7     | GND   | GND   | GND   |
   +----------+-------+-------+-------+

J2-5 Parity Check

J2-6 The output pin of the clock spindle synchronous operation.

J2-7 The input pin of the clcok spindle synchronous operation.

J2-9-14 GROUND













TOP
previous page: Hard Drive: NEC: D3813 340MB 3.5"/SL    SCSI2 SE
  
page up: Hard Drive Specs from NEC
  
next page: Hard Drive: NEC: D3817 540MB 3.5"/SL    SCSI2 SE