D 2 3 7 7 W D D NEC
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 9"/FH Cylinders 1024| | |
Capacity form/unform / 1415 MB Heads 27| | |
Seek time / track 15.0/ 5.0 ms Sector/track | | |
Controller IPI-2 Precompensation
Cache/Buffer KB Landing Zone
Data transfer rate MB/S int Bytes/Sector 512
3.000 MB/S ext
Recording method operating | non-operating
-------------+--------------
Supply voltage Temperature *C 10 40 | -10 50
Power: sleep W Humidity % 20 80 | 8 90
standby W Altitude km 3.000| 12.000
idle W Shock g |
seek W Rotation RPM 3600
read/write W Acoustic dBA
spin-up W ECC Bit
MTBF h 20000
Warranty Month
Lift/Lock/Park YES Certificates
NEC D2377 WDD JUMPER SETTING
Jumper Setting
--------------
|
|
Ready O|
Fault O|
Seek Error O|
I/O Error O|
Protected O|
|
CE RESET/ +-+SW1
INTERRUPT Switch +-+
|
Open Closed
FUNTION NAME | OPEN | CLOSED +----+SW2
Write Protect |Write Permit |Write Permit =>|x |8
Disable Port-B |Enable Port-B |Disable Port-B =>|x |7
Disable Port-A |Enable Port-A |Disable Port-A =>|x |6
Test Seek 2 |Test Seek Disable |Test Seek Enable =>|x |5
Test Seek 1 |Test Seek Disable |Test Seek Enable =>|x |4
Test Mode Select |Test Mode Disable |Test Mode Enable =>|x |3
Diagnostic Mode 2 |Normal Mode |Diagnostic Mode =>|x |2
Diagnostic Mode 1 |Normal Mode |Diagnostic Mode =>|x |1
| | +----+
| | +----+SW3
Start Delay Control|Delay Permit |Delay Inhibit =>| x|8
Unit Address 2(2) |"True" |"False" =>| x|7
Unit Address 2(1) |"True" |"False" =>| x|6
Unit Address 2(0) |"True" |"False" =>| x|5
Motor Start Mode |Remote Mode |Local Mode =>| x|4
Sweep Trigger Mode |Override Sweep Mode|Self Trigger Mode=>| x|3
Sweep Cycle Control|Enable |Disable =>| x|2
RESERVED | | =>| x|1
+----+
+----+SW4
+| x|8
|| x|7
|| x|6
RESERVED ---------------------+| x|5
|| x|4
|| x|3
|| x|2
+| x|1
+----+
|
|
|