Hard Drive: MAXTOR: 85121A8 OEM DIAMOND 5121MB 3.5"/SL ATA3

8 5 1 2 1 A 8     O E M   D I A M O N D    MAXTOR
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders    6569|10585|     |
Capacity form/unform  5121/      MB        Heads           8|   15|     |
Seek time   / track  10.0/ 1.0 ms          Sector/track     |   63|     |
Controller           IDE / ATA3            Precompensation
Cache/Buffer           256 KB MAXCACHE     Landing Zone
Data transfer rate    8.000 MB/S int       Bytes/Sector      512
                     16.700 MB/S ext PIO4
Recording method     RLL 8/9                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 71
Power: sleep          0.6 W     Humidity     %         5 95    |      5 95
       standby        0.8 W     Altitude    km    -0.061  3.048|
       idle           4.5 W     Shock        g        20       |    150
       seek           5.0 W     Rotation   RPM      5400
       read/write     5.3 W     Acoustic   dBA        36
       spin-up       12.4 W     ECC        Bit   SMART
                                MTBF         h     500000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

MAXTOR 85121A8 JUMPER SETTING

            J1 IDE Connector      Jumper       J2 Power
         +----------- ----------++-----------++---------+
         | .................... || * * *   * || X X X X |
         | .......... ......... || * * * * * || X X X X |
         +----------------------++-----------++---------+

Jumpers

MAXTOR 85121A8 JUMPER SETTING

 Jumper Setting
 ==============
                                        +---+---+---+---+---+
              Jumper Destination        |J50|J48|J46|J44|J42|
  +-------------------------------------+---+---+---+---+---+
  | Master/Slave                        |   |   |   |   |   |
  |  Only Drive in single drive system* | J |   |   |   |   |
  |  Master in a dual drive system*     | J |   |   |   |   |
  |  Slave in a dual drive system       | O |   |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  | Cable Select                        |   |   |   |   |   |
  |  Disabled*                          |   | O |   |   |   |
  |  Enabled                            |   | J |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  |  4092 Cylinder Option               |   |   |   |   |   |
  |  Disabled*                          |   |   | O |   |   |
  |  Enabled                            |   |   | J |   |   |
  +-------------------------------------+---+---+---+---+---+
  | Factory Reserved                    |   |   |   | O |   |
  +-------------------------------------+---+---+---+---+---+
  | Factory Reserved                    |   |   |   |   | O |
  +-------------------------------------+---+---+---+---+---+

         J=Jumpered O=Open *=Default

                     Pin 1
     J1 IDE Connector  |                J2 Power
  +----------- --------|-++-----------+----------+
  | .................... || @ * *   o |/         \
  | .......... ......... || @ o o o o || O O O O |
  +----------------------++-----------++---------+
                            | | | | |    | | | |
                            | | | | |    | | | |
      J50 Master/Slave -----+ | | | |    | | | + +12V        (Yellow)
      J48 Cable Select -------+ | | |    | | +-- +12V Return (Black)
      J46 4092 Cyl Limitation---+ | |    | +----- +5V Return (Black)
      J44 Factory Reserved -------+ |    +------- +5V        (Red)
      J42 Factory Reserved ---------+

        @ = Default Jumped Positions
        * = "Spare" Jumper Position
        o = Default Open Positions

Install

-ANY DIREC.

Notes on installation
=====================

Installation direction
----------------------

     horizontally                           vertically
   +-----------------+             +--+                       +--+
   |                 |             |  +-----+           +-----+  |
   |                 |             |  |     |           |     |  |
 +-+-----------------+-+           |  |     |           |     |  |
 +---------------------+           |  |     |           |     |  |
                                   |  |     |           |     |  |
                                   |  |     |           |     |  |
 +---------------------+           |  +-----+           +-----+  |
 +-+-----------------+-+           +--+                       +--+
   |                 |
   |                 |
   +-----------------+

The drive will operate in all axis (6 directions).

Features

MAXTOR 85121A8 JUMPER SETTING

Power Mode Definitions:
-----------------------
Active
The drive is spinning and most circuitry is powered on. The drive is
capable of responding to read commands in the shortest possible
time. Read/Write heads are positioned over the data area.

Idle
The drive is spinning., the actuator is parked and powered off,
and all other circuitry is powered on. The drive is capable of
responding to read commands within 40 ms.

Read/Write
Data is being read from or written to the drive.

Spin-up
The drive is spinning up following initial application of power and
has yet not reached full speed. Maximum current draw lasts one
second.

Sleep
This is the lowest power state. The interface becomes inactive. A
software or hardware reset is required to return the drive to
Standby.

Standby
The spin motor is not spinning. The drive will leave this mode
upon receipt of a command that requires disk access.
The time-out value for this mode is programmable. The buffer is
active to accept write data.