8 1 0 8 0 A 3 O E M C R Y S T A L MAXTOR
Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders 5446| 2100| |
Capacity form/unform 1080/ MB Heads 3| 16| |
Seek time / track 12.0/ 2.0 ms Sector/track | 63| |
Controller IDE / ATA3 Precompensation
Cache/Buffer 128 KB MAXCACHE Landing Zone
Data transfer rate 5.200 MB/S int Bytes/Sector 512
16.700 MB/S ext PIO4
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 55 | -40 71
Power: sleep 0.5 W Humidity % 5 95 | 5 95
standby 0.7 W Altitude km -0.061 3.048|
idle 4.5 W Shock g 20 | 150
seek 5.7 W Rotation RPM 4480
read/write 5.9 W Acoustic dBA 37
spin-up 13.0 W ECC Bit SMART
MTBF h 400000
Warranty Month
Lift/Lock/Park YES Certificates
MAXTOR 81080A3 JUMPER SETTING
Pin 1
J1 IDE Connector | J2 Power
+----------- --------+-++-----------+---------+
| .................... || @ * * o | |
| .......... ......... || @ o o o o | O O O O |
+----------------------++-----------+---------+
| | | | | | | | |
| | | | | | | | |
J50 Master/Slave ---+ | | | | | | | +- +12V (Yellow)
J48 Cable Select -----+ | | | | | +--- +12V Return (Black)
J46 Write Cache -------+ | | | +----- +5V Return (Black)
J44 Factory Reserved -----+ | +------- +5V (Red)
J42 4092 Cyl Limitation ----+
@ = Default Jumped Positions
* = "Spare" Jumper Position
o = Default Open Positions
MAXTOR 81080A3 QUICK INSTALLATION GUIDE
Jumper Setting
==============
Jumper Designations |J50|J48|J46|J44|J42|
+-------------------------------------+---+---+---+---+---+
| Master/Slave | | | | | |
| Only Drive in single drive system* | J | | | | |
+-------------------------------------+---+---+---+---+---+
| Master in a dual drive system* | J | | | | |
+-------------------------------------+---+---+---+---+---+
| Slave in a dual drive system | O | | | | |
+-------------------------------------+---+---+---+---+---+
+-------------------------------------+---+---+---+---+---+
| Cable Select | | | | | |
| Disabled* | | O | | | |
+-------------------------------------+---+---+---+---+---+
| Enabled | | J | | | |
+-------------------------------------+---+---+---+---+---+
+-------------------------------------+---+---+---+---+---+
| Write Cache | | | | | |
| Enabled* | | | O | | |
+-------------------------------------+---+---+---+---+---+
| Disabled | | | J | | |
+-------------------------------------+---+---+---+---+---+
+-------------------------------------+---+---+---+---+---+
| Factory Reserved | | | | O | |
+-------------------------------------+---+---+---+---+---+
| 4092 Cylinder Option | | | | | |
| Disabled* | | | | | O |
+-------------------------------------+---+---+---+---+---+
| Enabled | | | | | J |
+-------------------------------------+---+---+---+---+---+
J=Jumpered O=Open *=Default