Hard Drive: MAXTOR: 7813AP 813MB 3.5"/SL ATA2 FAST

7 8 1 3 A P    MAXTOR
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders        | 1579|     |
Capacity form/unform   813/      MB        Heads            |   16|     |
Seek time   / track      /     ms          Sector/track     |   63|     |
Controller           IDE / ATA2 FAST/ENHA  Precompensation
Cache/Buffer               KB              Landing Zone
Data transfer rate          MB/S int       Bytes/Sector      512
                            MB/S ext
Recording method                                    operating  | non-operating
                                                  -------------+--------------
Supply voltage                  Temperature *C                 |
Power: sleep              W     Humidity     %                 |
       standby            W     Altitude    km                 |
       idle               W     Shock        g                 |
       seek               W     Rotation   RPM
       read/write         W     Acoustic   dBA
       spin-up            W     ECC        Bit
                                MTBF         h
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

MAXTOR 71050/71626/71260/71084/7813/7541AP QUICK REFERENCE

  +---------------------------------------------------------+
  |                                          J20******      |
  |         COMPONENT SIDE                      ******      |XXI
  |                                                         |XXN
  |                                                         |XXT
  |                                                         |XXE
  |                                                         |XXR
  |                                                         |XXF
  |                                                         |XXA
  |                                                         |XXC
  |                                                         |XXE
  |                                                         |XX
  |                                                         |XX
  |                                                         |XX
  |                                                         |  1
  |                                                         |XX Power
  |                                                         |XX
  +---------------------------------------------------------+  1

Jumpers

MAXTOR 71626/71260/71084/7813/7541AP QUICK REFERENCE

Jumper Setting
==============

 Jumper Designation
 ------------------
     +---------------- J20
     |  +------------- J21 RESERVED!
     |  |  +---------- J22 RESERVED!
     *  *  *  *  *  *
     *  *  *  *  *  *
              |  |  +- J25
              |  +---- J24
              +------- J23
  +-----------------------+------+------+------+
  |                       | J24  | J23  | J20  |
  +-----------------------+------+------+------+
  | Cable Select          |      |      |      |
  |  Disabled (default)   |OPEN  |      |      |
  |  Enabled              |CLOSED|      |      |
  +-----------------------+------+------+------+
  | Write Cache           |      |      |      |
  |  Enabled (default)    |      |OPEN  |      |
  |  Disabled             |      |CLOSED|      |
  +-----------------------+------+------+------+
  | Master/Slave          |      |      |      |
  |  Only Drive in system |      |      |CLOSED|(default)
  |  Master               |      |      |CLOSED|
  |  Slave                |      |      |OPEN  |
  +-----------------------+------+------+------+
 A spare shunt is shipped between J23 and J24.

NOTE
Jumpers J21 and J22 are factory reserved.

 DC Power connector
 ------------------
  pin 1    +12 VDC
  pin 2    +12 Volts Return
  pin 3    + 5 Volts Return
  pin 4    + 5 VDC

Features

MAXTOR 71626/71260/71084/7813/7541 QUICK REFERENCE

Installation Steps
------------------
Warning
Pre-loaded Software on Drive
This Maxtor hard drive is factory configured with a 112MB partition
containing Max Blast Disk Manager installation software by Ontrack
Systems. Please leave this partition intact until you choose the
appropriate installation option.

As a precautionary measure, Maxtor recommendeds that you download a
copy of the MaxBlast software to a blank diskette even if you choose
an alternate high-level formatting method.

Install a 40-pin ribbon connector. The striped edge of this cable
represents pin 1 and must be oriented towards pin 1 at the drive
connector and at the host connector.

Install a DC power connector...

If AT BIOS supports user programmable parameters, program System BIOS
with one of these default Parameters.

Model Cylinders Heads Sectors Capacity
71262AP 3158 16 63 1,626 MB
71260AP 2632 16 63 1,260 MB
71084AP 2105 16 63 1,084 MB
7813AP 1579 16 63 813 MB
7541AP 1052 16 63 541 MB

If AT
BIOS does not support programmable drive type, choose parameters that
closely match, but do not exceed, the drive's formatted capacity.

The drive is now ready for partitioning and high-level formatting
with any operating system. For example:

          Partition the drive using the FDISK command from MS-DOS
          version 3.3 of higher.
          High level format the drive using the FORMAT command from
          MS-DOS version 3.3 or higher.

Secure the drive in a suitable drive bay with 6-32 x 1/4" screws.

NOTE
WPC and Landing Zone BIOS entries do not need a specific number for
proper operation. Maxtor AT interface hard drives will ignore and
override any numbers programmed.

Important - Please Read
-----------------------
This Quick Reference is intendened only for experienced engineers and
technicans. If you are not familar with the procedures described
here, please have a qualified computer technican perform drive
handling and installation.