lotus

previous page: Hard Drive: KALOK: KL-330 33MB 3.5"/HH    RLL ST412
  
page up: Hard Drive Specs from KALOK
  
next page: Hard Drive: KALOK: KL-343 43MB 3.5"/HH    IDE / AT

Hard Drive: KALOK: KL-341 43MB 3.5"/HH SCSI1 SE




K L - 3 4 1    KALOK
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/HH               Cylinders     676|     |     |
Capacity form/unform    43/      MB        Heads           4|     |     |
Seek time   / track  33.0/     ms          Sector/track   31|     |     |
Controller           SCSI1 SINGLE-ENDED    Precompensation 65535
Cache/Buffer             8 KB              Landing Zone
Data transfer rate    1.000 MB/S int       Bytes/Sector      512
                            MB/S ext
Recording method     RLL 2/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C                 |
Power: sleep              W     Humidity     %                 |
       standby            W     Altitude    km                 |
       idle               W     Shock        g         8       |     40
       seek               W     Rotation   RPM      3600
       read/write         W     Acoustic   dBA        48
       spin-up            W     ECC        Bit
                                MTBF         h      40000
                                Warranty Month        12
Lift/Lock/Park     YES          Certificates                                  

Layout

KALOK KL-341 TECHNICAL DESCRIPTION

  +---------------------------------------------------------++-+
  |                                                         || |J4
  |                                                         |+-1
  |                                                       ++|XX I
  |                                                       |||XX N
  |                                                       |||XX T
  |                                                       ++|XX E
  |                                            Terminating++|XX R
  |                                            Resistors  |||XX F
  |                                                       |||XX A
  |                                                       ++|XX C
  |                                                       ++|XX E
  |                                                       |||XX
  |                                                       |||XX
  |                                                       ++|XX1
  |                                                         |
  |                                                         XXX Power
  +-------------------------------------------------------1-+

Jumpers

KALOK KL-341 TECHNICAL DESCRIPTION

Jumper Setting
==============

 J4  SCSI ID
 -----------
   +----------+-----------------------+
   | SCSI ID  |        Jumpers        |
   |          |   3   |   4   |   5   |
   +----------+-------+-------+-------+
   |    0     | OPEN  | OPEN  | OPEN  |
   |    1     | OPEN  | OPEN  | CLOSED|
   |    2     | OPEN  | CLOSED| OPEN  |
   |    3     | OPEN  | CLOSED| CLOSED|
   |    4     | CLOSED| OPEN  | OPEN  |
   |    5     | CLOSED| OPEN  | CLOSED|
   |    6     | CLOSED| CLOSED| OPEN  |
   |    7     | CLOSED| CLOSED| CLOSED|
   +----------+-------+-------+-------+

The other jumpers should be left open!

Terminators
-----------
Remove the terminators from all but the last drive in chain.













TOP
previous page: Hard Drive: KALOK: KL-330 33MB 3.5"/HH    RLL ST412
  
page up: Hard Drive Specs from KALOK
  
next page: Hard Drive: KALOK: KL-343 43MB 3.5"/HH    IDE / AT