lotus

previous page: Hard Drive: FUJITSU: MPC-3032AT  PICOBIRD 3240MB 3.5"/SL    ULTRA ATA
  
page up: Hard Drive Specs from FUJITSU
  
next page: Hard Drive: FUJITSU: MPC-3064AT  PICOBIRD 6480MB 3.5"/SL    ULTRA ATA

Hard Drive: FUJITSU: MPC-3043AT PICOBIRD 4320MB 3.5"/SL ULTRA ATA




M P C - 3 0 4 3 A T     P I C O B I R D    FUJITSU
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders   11116| 8940|     |
Capacity form/unform  4320/      MB        Heads           3|   15|     |
Seek time   / track  10.5/ 2.0 ms          Sector/track     |   63|     |
Controller           ULTRA ATA             Precompensation
Cache/Buffer           256 KB              Landing Zone
Data transfer rate   14.000 MB/S int       Bytes/Sector      512
                     33.300 MB/S ext UDMA
Recording method     EPRML16/17                     operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 60
Power: sleep              W     Humidity     %         8 80    |      5 85
       standby            W     Altitude    km    -0.060  3.000| -0.060 12.000
       idle           3.8 W     Shock        g        10       |     75
       seek               W     Rotation   RPM      5400
       read/write     5.1 W     Acoustic   dBA
       spin-up            W     ECC        Bit   SMART
                                MTBF         h     500000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

FUJITSU MPC-3032AT/3043/3064/3084/3096AT JUMPER SETTINGS A1CA01675-0

  +---------------------------------------------------------+
  |                                                         |XX
  |                                                         |XXI
  |                                                         |XXN
  |                                                         |XXT
  |                                                         |XXE
  |                                                         |XXR
  |                                                         |XXF
  |                                                         |XXA
  |                                                         |XXC
  |                                                         |XXE
  |                                                         |XX
  |                                                         |+-+Master
  |                                                         || |/Slave
  |                                                         |+-+
  |                                                         |XX Power
  |                                                         |XX
  +---------------------------------------------------------+

Jumpers

FUJITSU MPC-3032/3043/3064/3084/3096AT JUMPER SETTING A1CA01675-0030

Jumper Settings
===============

 Master Drive
 ------------
 +--2-4-6+
 |  X * *|
 |  X xxx|
 +--1-3-5+

 Slave Drive
 -----------
 +--2-4-6+
 |xxx * *|
 |  * xxx|
 +--1-3-5+

Cable Select Mode Setting (CSEL)
--------------------------------
Cable select mode gives an alternative method by which the drive may
be set to Master or Slave. A special cable is needed to implement
this features and should only be used if supported by BOTH drives.

 +--2-4-6+
 |  xxx *|
 |  * xxx|
 +--1-3-5+

********************************************************************

Spare Jumper Settings
---------------------
If the drive cannot be recognized by the system, due to non-
translating BIOS (legacy), which does not allow drives with
capacities greater than 2.1GB, the following jumper setting should be
applied.

 Master Drive Setting
 --------------------
 +--2-4-6+
 |  X * X|
 |  X * X|
 +--1-3-5+

 Slave Drive Setting
 -------------------
 +--2-4-6+
 |xxx * X|
 |  * * X|
 +--1-3-5+

 Cable Select Mode Setting (CSEL)
 --------------------------------
 +--2-4-6+
 |  xxx X|
 |  * * X|
 +--1-3-5+

Install

FUJITSU MPC AT JUMPER SETTINGS A1CA01675-0030-01

Notes on installation
=====================

Installation direction
----------------------

     horizontally                           vertically
   +-----------------+             +--+                       +--+
   |                 |             |  +-----+           +-----+  |
   |                 |             |  |     |           |     |  |
 +-+-----------------+-+           |  |     |           |     |  |
 +---------------------+           |  |     |           |     |  |
                                   |  |     |           |     |  |
      x           x                |  |     |           |     |  |
 +------x------x-------+           |  +-----+           +-----+  |
 +-+------x--x-------+-+           +--+                       +--+
   |       xx        |
   |     x    x      |
   +---x--------x----+
     x            x













TOP
previous page: Hard Drive: FUJITSU: MPC-3032AT  PICOBIRD 3240MB 3.5"/SL    ULTRA ATA
  
page up: Hard Drive Specs from FUJITSU
  
next page: Hard Drive: FUJITSU: MPC-3064AT  PICOBIRD 6480MB 3.5"/SL    ULTRA ATA