lotus

previous page: Hard Drive: FUJITSU: MHA-2021AT 2160MB 2.5"/SSL   ATA3
  
page up: Hard Drive Specs from FUJITSU
  
next page: Hard Drive: FUJITSU: MHC-2032AT 3250MB 2.5"/SSL   ATA3 ULTRA

Hard Drive: FUJITSU: MHA-2032AT 3250MB 2.5"/SSL ATA3




M H A - 2 0 3 2 A T    FUJITSU
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 2.5"/SUPERSLIMLINE    Cylinders    6372| 6300|     |
Capacity form/unform  3250/      MB        Heads           6|   16|     |
Seek time   / track  13.0/ 2.5 ms          Sector/track     |   63|     |
Controller           IDE / ATA3            Precompensation
Cache/Buffer           128 KB              Landing Zone
Data transfer rate    5.000 MB/S int       Bytes/Sector      512
                     16.600 MB/S ext PIO4
Recording method     PR4ML                          operating  | non-operating
                                                  -------------+--------------
Supply voltage     5 V          Temperature *C         5 55    |    -40 65
Power: sleep              W     Humidity     %         8 90    |      5 95
       standby        0.2 W     Altitude    km    -0.300  3.000| -0.300 12.000
       idle           0.2 W     Shock        g       100       |    300
       seek           0.9 W     Rotation   RPM      4000
       read/write     2.5 W     Acoustic   dBA        30
       spin-up            W     ECC        Bit
                                MTBF         h     300000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

FUJITSU MHA-2021/2032AT SWITCH SETTINGS

  +---------------------------------------------------------+
  |                                                         |XX
  |                                                         |XXI
  |                                                         |XXN
  |                                                         |XXT
  |                                                         |XXE
  |                                                         |XXR
  |                                                         |XXF
  |                                                         |XXA
  |                                                         |XXC
  |                                                         |XXE
  |                                                         |XX
  |                                                         |XX
  |                                                         1XX
  |                                                         |xxJumper
  +---------------------------------------------------------+

Jumpers

FUJITSU MHA-2021AT/2032AT SWITCH SETTINGS

Jumper Setting
==============

  +CNH1--1-----Interface---------  MASTER
  |* *   * * * * * * * *
  |* *   * * * * * *
  +------------------

  +CNH1--1-----Interface---------  SLAVE
  |* *   * * * * * * * *
  |xxx   * * * * * *
  +B-D---2-----------

  +A-C---1-----Interface---------  CABLE SELECT
  |xxx   * * * * * * * *
  |* *   * * * * * *
  +------------------

The CSEL setting is not depended on setting between pins B and D.

By connecting the CSEL of the master device to the CSEL Line
(conductor) of the cable and connecting it to ground further, the
CSEL is set to low level.

The device is identified as a master device. At this time, the CSEL
of the slave device does not have a conductor. Thus, since the slave
device is not connected to the CSEL conductor, the CSEL is set to
high level. The device is identified as a slave device.













TOP
previous page: Hard Drive: FUJITSU: MHA-2021AT 2160MB 2.5"/SSL   ATA3
  
page up: Hard Drive Specs from FUJITSU
  
next page: Hard Drive: FUJITSU: MHC-2032AT 3250MB 2.5"/SSL   ATA3 ULTRA