lotus

previous page: Hard Drive: CONNER: CP-340 42MB 3.5"/HH    SCSI1 SE
  
page up: Hard Drive Specs from CONNER
  
next page: Hard Drive: CONNER: CP-344 42MB 3.5"/HH    IDE / AT

Hard Drive: CONNER: CP-342 42MB 3.5"/HH IDE / AT




C P - 3 4 2    CONNER
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/HH               Cylinders        |  977|  805|
Capacity form/unform    42/      MB        Heads            |    5|    4|
Seek time   / track  29.0/     ms          Sector/track     |   17|   26|
Controller           IDE / AT              Precompensation
Cache/Buffer               KB              Landing Zone
Data transfer rate    1.000 MB/S int       Bytes/Sector      512
                            MB/S ext
Recording method     RLL                            operating  | non-operating
                                                  -------------+--------------
Supply voltage                  Temperature *C                 |
Power: sleep              W     Humidity     %                 |
       standby            W     Altitude    km                 |
       idle               W     Shock        g                 |
       seek               W     Rotation   RPM
       read/write         W     Acoustic   dBA
       spin-up            W     ECC        Bit
                                MTBF         h      20000
                                Warranty Month
Lift/Lock/Park     YES          Certificates

Jumpers

CONNER CP342 JUMPER SETTING

Jumper Setting
==============

Master
E6-E7 Closed

Single
E5-E7 Closed

Slave
E6 Closed

General

CONNER CP-342 + WD

 Jumper Setting
 ==============
                             J8
                            +5-3-1+ +-----+ +-----+
 Master                     |X * *| |* X *| |* X X|
 E6-E7 Closed               |X * *| |* X *| |* X X|WD DRIVE
                            +6-4-2+ +-----+ +-----+
 Single                      Master  Slave   Slave
 E5-E7 Closed

Slave
E6 Closed

Installation with a WD93024A/95024A/93028AD/93048AD!
WD drive must be configured as SLAVE!
Conner drive must be configured as MASTER!













TOP
previous page: Hard Drive: CONNER: CP-340 42MB 3.5"/HH    SCSI1 SE
  
page up: Hard Drive Specs from CONNER
  
next page: Hard Drive: CONNER: CP-344 42MB 3.5"/HH    IDE / AT