lotus

previous page: Hard Drive: CONNER: CP-3204F 212MB 3.5"/HH    IDE / AT
  
page up: Hard Drive Specs from CONNER
  
next page: Hard Drive: CONNER: CP-3360 363MB 3.5"/HH    SCSI2 SE

Hard Drive: CONNER: CP-3304 340MB 3.5"/HH IDE / AT




C P - 3 3 0 4    CONNER
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/HH               Cylinders    1807|  659|     |
Capacity form/unform   340/      MB        Heads           8|   16|     |
Seek time   / track  12.0/ 3.0 ms          Sector/track     |   63|     |
Controller           IDE / AT              Precompensation
Cache/Buffer           256 KB SEGMENTED    Landing Zone
Data transfer rate    2.000 MB/S int       Bytes/Sector      512
                      8.000 MB/S ext
Recording method     RLL 2/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 60
Power: sleep              W     Humidity     %         8 80    |      8 80
       standby            W     Altitude    km    -0.061  3.048|        12.192
       idle           4.4 W     Shock        g         5       |     50
       seek           6.8 W     Rotation   RPM      3828
       read/write     4.9 W     Acoustic   dBA        40
       spin-up            W     ECC        Bit
                                MTBF         h     150000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

CONNER CP3304 CUSTOMER OPTIONS

    +-------------------------------------------------------+
    |                                               ***     |XX J2
    |                                              SS,DSP   |XX I
    |   +-+                                                 |XX N
    |   | |                                                 |XX T
    |   | |                                                 |XX E
    |   | |                                                 |XX R
    |   +-+                                                 |XX F
    |                                                       |XX A
    |                                                       |XX C
    +---+                                                   |XX E
   1+-Sync Spindle                                          1XX
   2|xLED                                                   |
    |x| |                                                   |XX J4
    |x| |                            E1-E3                  |XX Power
    +-+ |                              +++++                |XX
    +---+                              ++++C/D              |  1
    +-------------------------------------------------------+

Jumpers

CONNER CP3304 CUSTOMER OPTIONS

Jumper Setting
==============

C/D Master/Slave
----------------
The C/D jumper is used to determine whether the drive is a master
(drive C) or slave (drive D). The drive is configured as a master
(drive C) when jumpered and as a slave drive (D drive) when not
jumpered.

 DSP & SS
 --------
 This pair of jumpers determines the signals on pin 39 of the inter-
 face connector.
 +-------------+---------------------------------------------------+
 |    Jumper   |Description                                        |
 |DSP   |SS    |                                                   |
 +------+------+---------------------------------------------------+
 |CLOSED|OPEN  |- spindle synchronization signal is disabled on    |
 |      |      |  pin 39                                           |
 |      |      |- activity LED signal available on pin 39          |
 |      |      |- Must be in place for CAM/ATA drives              |
 +------+------+---------------------------------------------------+
 |OPEN  |CLOSED|- spindle synchronization signal enabled on pin 39 |
 |      |      |- activity LED signal disabled from pin 39         |
 +------+------+---------------------------------------------------+
 |OPEN  |OPEN  |- pin 39 floating                                  |
 +------+------+---------------------------------------------------+

E1/E2/E3
--------
E1 Disable Spin Up until command received

E2 and E3 NOT USED!

 J4   DC Power and pin connector assignments
 -------------------------------------------
 +--------------------
 | +-----J4-----+     pin 1    +12 VDC
 | | 1  2  3  4 |     pin 2    +12 Volts Return
 | +------------+     pin 3    + 5 Volts Return
 +-----------------   pin 4    + 5 VDC

Install

CONNER CP3304/3504 CUSTOMER OPTIONS

Mounting Holes
--------------
Side: 6-32 UNC-2B .12 Max. Insertion
Bottom: 6-32 UNC-2B .25 Max. Insertion













TOP
previous page: Hard Drive: CONNER: CP-3204F 212MB 3.5"/HH    IDE / AT
  
page up: Hard Drive Specs from CONNER
  
next page: Hard Drive: CONNER: CP-3360 363MB 3.5"/HH    SCSI2 SE