Hard Drive: CONNER: CP-30101G 121MB 3.5"/SL IDE / AT

C P - 3 0 1 0 1 G    CONNER
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders    1522|  761|     |
Capacity form/unform   121/      MB        Heads           4|    8|     |
Seek time   / track  19.0/ 5.0 ms          Sector/track   39|   39|     |
Controller           IDE / AT              Precompensation
Cache/Buffer            64 KB              Landing Zone
Data transfer rate    1.250 MB/S int       Bytes/Sector      512
                            MB/S ext
Recording method     RLL 2/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage                  Temperature *C                 |
Power: sleep              W     Humidity     %                 |
       standby            W     Altitude    km                 |
       idle           2.8 W     Shock        g                 |
       seek               W     Rotation   RPM      3399
       read/write         W     Acoustic   dBA
       spin-up            W     ECC        Bit
                                MTBF         h      50000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

CONNER CP30101G JUMPER SETTINGS

  +-------------------------------------------------------+
  |                                                       |XX 40 Pin
  |                                                       |XX Task
  |                                                       |XX File
  |                                                       |XX
  |                                                       |XX Inter-
  |                                                       |XX face
  |                                                       |XX
  |                                                       |XX J2
  |                                                       |XX
  |                                                       |XX
  |             +-+-+-+                                   |  1
  |             +-+-+-+                                   |XX Power J3
  |            C/D DSP  E1                                |XX
  +-------------------------------------------------------+

Jumpers

CONNER CP30101G JUMPER SETTING

Jumper Setting
==============

 Single Drive | Master       | Slave
 -------------+--------------+-------
 C/D in       | C/D + DSP in | NONE

E1 not used