WY-958-2 (PM2012B) Hard Disk/Floppy Controller Settings and Configuration
WYSE TECHNOLOGY, INC.
WY-958-2 (PM2012B)
Data bus: | 32-bit EISA |
Size: | Three-quarter length, Full-height card |
Hard drive supported: | Up to seven SCSI devices |
Floppy drives supported: | None |
CONNECTIONS | |
Function | Location |
34-pin cable connector - floppy drive | J1 |
50-pin proprietary connector | J2 |
Proprietary expansion connector | J3 |
Proprietary expansion connector | J4 |
4-pin connector - drive active LED | J6 |
Expansion connector | J7 |
Proprietary expansion connector | J9 |
50-pin SCSI interface - internal | J10 |
50-pin SCSI interface - external | J11 |
10-piece LED | U1 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Factory configured - do not alter | JP19 | Open |
SCSI BUS TERMINATION CONFIGURATION | ||
Internal Devices | External Devices | Terminator Status |
Installed | Not installed | Installed |
Not installed | Installed | Installed |
Installed | Installed | All three removed |
MISCELLANEOUS TECHNICAL NOTES |
Note: LED configuration and expansion module diagrams are not available. |
My Books
