XTAT-FASST Hard Disk/Floppy Controller Settings and Configuration

Data bus:	8-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Up to seven SCSI devices
Floppy drives supported:	None

CONNECTIONS
Function	Location
50-pin SCSI Interface connector - internal	J1
50-pin SCSI Interface connector - external	J2

I/O OPTIONS - W1
DMA		Jumper 1	Jumper 2	Jumper 3
»	Single Byte Programmed I/O	open	open	open
	DMA Cannel 1	closed	open	open
	Demand Drive I/O	open	closed	open
	DMA Channel 3	closed	closed	closed

INTERRUPT REQUEST
IRQ	W1/jumper 4	W1/jumper 5	W1/jumper 6	W4
IRQ2	open	closed	open	Jumper 1 - closed
IRQ3	closed	closed	open	Jumper 2 - closed
IRQ4	open	open	closed	Jumper 3 - closed
IRQ5	closed	open	closed	Jumper 4 - closed
IRQ6	open	closed	closed	Jumper 5 - closed
IRQ7	closed	closed	closed	Jumper 6 - closed

I/O PORT ADDRESS - W2
Address	Jumper 1	Jumper 2	Jumper3	Jumper 4
200h	closed	closed	closed	closed
220h	open	closed	closed	closed
240h	closed	open	closed	closed
260h	open	open	closed	closed
280h	closed	closed	open	closed
2A0h	open	closed	open	closed
2C0h	closed	open	open	closed
2E0h	open	open	open	closed
300h	closed	closed	closed	open
320h	open	closed	closed	open
340h	closed	open	closed	open
360h	open	open	closed	open
380h	closed	closed	open	open
3A0h	open	closed	open	open
3C0h	closed	open	open	open
3E0h	open	open	open	open

BIOS ADDRESS - W3
Address		Jumper 1	Jumper 2	Jumper 3	Jumper 4
	C000h	closed	closed	closed	closed
	C400h	open	closed	closed	closed
»	C800h	closed	open	closed	closed
	CC00h	open	open	closed	closed
	D000h	closed	closed	open	closed
	D4OOh	open	closed	open	closed
	D800h	closed	open	open	closed
	DC00h	open	open	open	closed
	E000h	closed	closed	closed	open
	E400h	open	closed	closed	open
	E800h	closed	open	closed	open
	EC00h	open	open	closed	open
	F000h	closed	closed	open	open
	F4OOh	open	closed	open	open
	F800h	closed	open	open	open
	FC00h	open	open	open	open