WESTERN DIGITAL CORPORATION
WD1003-WA2
Chipset | Western Digital |
Data Bus | 16-bit ISA |
Card Size | Full height, three-quarters length |
Hard Drives Supported | Two ST506/412(MFM) devices |
Floppy Drives Supported | Two 360KB or 1.2MB drives |
CONNECTIONS | |||
Function | Label | Function | Label |
34-pin cable connector - floppy drive | J1 | 34-pin control cable connector - hard drive | J5 |
20-pin data cable connector - drive 2 | J3 | 2-pin drive active LED | J6 |
20-pin data cable connector - drive 1 | J4 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
» | Hard drive interface supports all standard transfer rates | E7 | Pins 1 & 2 closed |
Hard drive interface does not support 300Kbps transfer rate | E7 | Pins 2 & 3 closed |
BASE I/O ADDRESS SELECTION | |
Setting | E1 |
Primary | Pins 2 & 3, 5 & 6 closed |
Secondary | Pins 1 & 2, 4 & 5 closed |