WD30286 Hard Disk/Floppy Controller Settings and Configuration
WESTERN DIGITAL CORPORATION
WD30286
Data bus: 16-bit, PC/AT
Size: Half-length, half-height card
Hard drives supported: One IDE drive
Floppy drives supported: None
Maximum heads/cyl.: 8 heads and 1024 cylinders
Special features: Three AT expansion slots
CONNECTIONS | |
Function | Location |
4-pin connector-DC power (back side) | CN1 |
16-bit AT expansion slot | CN2 |
16-bit AT expansion slot | CN3 |
16-bit AT expansion slot | CN4 |
40-pin IDE (AT) Interface control cable connector-internal | CN5 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Primary hard drive configuration-this is the only hard drive in the system | JP1 JP2 | pins 1 & 2 closed pins 1 & 2 closed |
Supports more than one hard drive in the system | JP1 JP2 | pins 2 & 3 closed pins 2 & 3 closed | |
My Books
