CC-8 SCSI ENABLER Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
CC-8 SCSI ENABLER
Data bus: 8-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Up to six SCSI devices
Floppy drives supported: None
CONNECTIONS | |
Function | Location |
50-pin SCSI connector-internal | CN1 |
2-pin connector-drive active LED | CN2 |
DB-25 SCSI connector-external | CN3 |
5-pin connector-DC power | CN4 |
SCSI ADDRESS | ||||
Address | JP1/jumper 1 | JP1/jumper 2 | JP1/jumper 3 | |
| » | 7 | open | open | open |
6 | closed | open | open | |
5 | open | closed | open | |
4 | closed | closed | open | |
3 | open | open | closed | |
2 | closed | open | closed | |
1 | open | closed | closed | |
0 | closed | closed | closed | |
INTERRUPT REQUEST | |||
IRQ | JP2/jumper 1 | JP2/jumper 2 | |
| » | IRQ5 | open | open |
IRQ4 | closed | open | |
IRQ3 | open | closed | |
IRQ2 | closed | closed | |
BIOS AND I/O PORT ADDRESS | ||||
BIOS Address | I/O Port Address | JP3/jumper 1 | JP3/jumper 2 | |
| » | D400h | 160h | open | open |
D000h | 3ECh | closed | open | |
CC00h | 35Ch | open | closed | |
C800h | 34Ch | closed | closed | |
MISCELLANEOUS TECHNICAL NOTES |
Software drivers are required to control more than one SCSI drive or SCSI removable-media type drives. |
My Books
