HF-102M Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
HF-102M
Data bus: | 16-bit, ISA |
Size: | Full-length, full-height card |
Hard drive supported: | Up to seven SCSI devices |
Floppy drives supported: | 360KB, 720KB, 1.2MB or 1.44MB drives |
CONNECTIONS | |
Function | Location |
34-pin control cable connector - floppy drive | J1 |
34-pin control cable connector - hard drive | J2 |
20-pin data cable connector - drive 0 | J3 |
20pin data cable connector - drive 1 | J4 |
4-pin connector - drive active LED | W1 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | 1:1 interleave select | W3 | closed |
Interleave software configured | W3 | open | |
| » | Floppy drive controller enabled | W6 | closed |
Floppy drive controller disabled | W6 | open | |
| » | Primary I/O address select | W9 | closed |
Alternate I/O address select | W9 | open | |
My Books
