SNB-C035 Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
SNB-C035
Data bus: 16-bit, ISA
Size: Half-length, half-height card
Hard drives supported: Two IDE Interface (AT)
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
Maximum heads/cyl.: 8 heads and 1024 cylinders
CONNECTIONS | |
Function | Location |
40-pin AT Interface (IDE) control cable connector-internal | CN1 |
34-pin data cable connector-floppy drive | CN2 |
4-pin connector-drive active LED | JP4 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy drive port address is 3F0-3F7h | JP2 | open |
Floppy drive port address is 370-377h | JP2 | closed | |
| » | IO CHRDY (I/O Channel Ready) disabled | JP3 | open |
IO CHRDY (I/O Channel Ready) enabled | JP3 | closed | |
My Books
