SUN-5240 Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
SUN-5240
Data bus: | 16-bit, ISA |
Size: | Half-length, full-height card |
Hard drive supported: | Two IDE(AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE(AT) connector | CN1 |
34-pin floppy drive connector | CN2 |
2-pin connector - drive active LED | CN3 |
USER CONFIGURABLE SETTINGS | ||
Function | Location | Setting |
IOCHRDY signal enabled | JP1 | closed |
IOCHRDY signal disabled | JP1 | open |
Single speed drives enabled | JP2 | open |
Dual speed drives enabled | JP2 | closed |
My Books
