PM-510D REV. 1 Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
PM-510D REV. 1
Data bus: | 16-bit, ISA |
Size: | Half-length, half-height card |
Hard drive supported: | Two IDE (AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE (AT) Interface connector | CN1 |
34-pin control cable connector - floppy drive | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | HDD enabled | JP1 | Closed |
HDD disabled | JP1 | Open | |
| » | Floppy drive enabled | JP2/A-E | All pins closed |
Floppy drive disabled | JP2/A-E | All pins open | |
My Books
