PM-510-C Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
PM-510-C
Q1/95 | |
Data bus: | 16-bit, ISA |
Size: | Half-length, half-height card |
Hard drive supported: | Two IDE (AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
4-pin connector - drive active LED | CN1 |
40-pin IDE (AT) Interface connector | CN2 |
34-pin control cable connector - floppy drive | CN3 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy drive enabled | J1 | Pins 1 & 2 closed |
Floppy drive disabled | J1 | Pins 2 & 3 closed | |
| » | HDD enabled | J2 | Pins 1 & 2 closed |
HDD disabled | J2 | Pins 2 & 3 closed | |
| » | Standard I/O check ready signal | J3 | Pins 1 & 2 closed |
Delayed I/O check ready signal | j3 | Pins 2 & 3 closed | |
My Books
