UNIDENTIFIED
MS-3802
Data bus: | 32-bit, VL-bus |
Size: | Three/quarter-length, half-height card |
Hard drive supported: | Two IDE (AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE (AT) interface connector - port 1 | CN1 |
4-pin connector - drive active LED | CN2 |
34-pin control cabled connector - floppy drive | CN3 |
Game port | CN4 |
10-pin serial port 2 - internal | CN5 |
9-pin serial port 1 - external | CN6 |
25-pin parallel port | CN7 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
» | Factory configured - do not alter | JP2 | Pins 1 & 2 closed |
» | Factory configured - do not alter | JP6 | Pins 1 & 2 closed |
» | Factory configured - do not alter | JP12 | Pins 2 & 3 closed |
» | Game port enabled | JP23 | Pins 1 & 2 closed |
Game port disabled | JP23 | Pins 2 & 3 closed |
HARD DRIVE SPEED | ||
Speed | JP1 | JP3 |
Low | Pins 1 & 2 closed | Pins 1 & 2 closed |
Middle | Pins 1 & 2 closed | Pins 2 & 3 closed |
High | Pins 2 & 3 closed | Pins 2 & 3 closed |
HARD DRIVE | |||
Setting | JP4 | JP5 | |
» | HDD enabled | Pins 1 & 2 closed | Pins 2 & 3 closed |
HDD disabled | Pins 2 & 3 closed | Pins 1 & 2 closed |
SERIAL PORT 1 CONFIGURATION | |||
COM | JP8 | JP9 | |
» | COM1 | Pins 1 & 2 closed | Pins 1 & 2 closed |
COM3 | Pins 1 & 2 closed | Pins 2 & 3 closed | |
Disabled | Pins 2 & 3 closed | N/A |
SERIAL PORT 2 CONFIGURATION | |||
COM | JP10 | JP11 | |
» | COM2 | Pins 1 & 2 closed | Pins 1 & 2 closed |
COM4 | Pins 1 & 2 closed | Pins 2 & 3 closed | |
Disabled | Pins 2 & 3 closed | N/A |
BIOS ADDRESS | ||
Address | JP14 | JP15 |
C800h | Closed | Closed |
CC00h | Closed | Open |
D800h | Open | Closed |
DC00h | Open | Open |
Note:The locations of JP14 and JP15 are not specified in manufacturer’s documentation. |
FLOPPY DRIVE | |||
Setting | JP18 | J19 | |
» | Primary drive only enabled | Pins 1 & 2 closed | Pins 1 & 2 closed |
Primary and secondary drives enabled | Pins 1 & 2 closed | Pins 2 & 3 closed | |
Disabled | Pins 2 & 3 closed | N/A |
PARALLEL PORT CONFIGURATION | ||||
LPT | JP20 | JP21 | JP22 | |
» | LPT1 | Pins 1 & 2 closed | Pins 1 & 2 closed | Pins 1 & 2 closed |
LPT2 | Pins 1 & 2 closed | Pins 2 & 3 closed | Pins 2 & 3 closed | |
Disabled | Pins 2 & 3 closed | N/A | N/A |