LTI-001C Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
LTI-001C
Data bus: | 16-bit ISA |
Size: | Half length, half-height card |
Hard drive supported: | Two IDE(AT) interface drives |
Floppy drives supported: | 360KB, 720KB, 1.2MB, 1.44MB |
CONNECTIONS | |
Function | Location |
40-pin IDE(AT) interface connector | J1 |
34-pin control cable connector - floppy drive | J2 |
4-pin connector - drive active LED | JP1 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | IDE interface direct interrupt select | JP2 | pins 2 & 3 closed |
IDE interface active interrupt select | JP2 | pins 1 & 2 closed | |
| » | Normal I/O speed enabled | JP3 | open |
High I/O speed enabled | JP3 | closed | |
| » | Floppy drive interface enabled | JP4 | closed |
Floppy drive interface disabled | JP4 | open | |
My Books
