IODE-3292PUV VERSION 1 Hard Disk/Floppy Controller Settings and Configuration

Data bus:	32-bit, VL-Bus
Size:	Three quarter-length, full-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE (AT) interface connector	CN1
34-pin control cable connector - floppy drive	CN2
Game port	CN3
10-pin serial port 1	CN4
10-pin serial port 2	CN5
25-pin parallel port	CN6
2-pin connector - drive active	J6

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Factory configured - do not alter	J3	pins 2 & 3 closed
»	Factory configured - do not alter	J4	pins 1 & 2 closed
»	IDE port enabled	J7	pins 1 & 2 closed
	IDE port disabled	J7	pins 2 & 3 closed
»	Hard drive is installed in system	J12	pins 2 & 3 closed
	Hard drive is not installed in system	J12	pins 1 & 2 closed
»	Floppy drive enabled	J16	pins 1 & 2 closed
	Floppy drive disabled	J16	pins 2 & 3 closed
»	Game port enabled	J19	pins 1 & 2 closed
	Game port disabled	J19	pins 2 & 3 closed

ACTIVE/RECOVERY TIME FOR 33MHZ CPU
Active	Recovery	J5	J8	J9	J10
5T	5T	pins 2 & 3 closed	pins 2 & 3 closed	pins 2 & 3 closed	pins 2 & 3 closed
5T	7T	pins 2 & 3 closed	pins 1 & 2 closed	pins 2 & 3 closed	pins 2 & 3 closed
7T	9T	pins 2 & 3 closed	pins 2 & 3 closed	pins 1 & 2 closed	pins 1 & 2 closed
Note:The value of variable "T" is 33ns.

ACTIVE/RECOVERY TIME FOR 50MHZ CPU
Active	Recovery	J5	J8	J9	J10
9T	9T	pins 1 & 2 closed	pins 2 & 3 closed	pins 1 & 2 closed	pins 2 & 3 closed
9T	11T	pins 1 & 2 closed	pins 1 & 2 closed	pins 1 & 2 closed	pins 2 & 3 closed
9T	13T	pins 1 & 2 closed	pins 2 & 3 closed	pins 2 & 3 closed	pins 1 & 2 closed
Note:The value of variable "T" is 20ns.

PARALLEL PORT CONFIGURATION
LPT/Address		J11	J17
»	LPT2/378h	pins 1 & 2 closed	pins 1 & 2 closed
	LPT3/278h	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	n/a

SERIAL PORT 1 CONFIGURATION
COM/Address		J13	J14
»	COM1/3F8h	pins 1 & 2 closed	pins 1 & 2 closed
	COM3/3E8h	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	n/a

SERIAL PORT 2 CONFIGURATION
COM/Address		J15	J18
»	COM2/2F8h	pins 1 & 2 closed	pins 1 & 2 closed
	COM4/2E8h	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	n/a