IDEPLUS-V5L Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Half-length, half-height card
Hard drive supported:	Two IDE(AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) connector	CN1
34-pin floppy drive connector	CN2
10-pin serial port 1 - internal	CN3
10-pin serial port 2 - internal	CN4
16-pin game port	CN5
25-pin parallel port - external	CN6
2-pin connector - drive active LED	JP2

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	IDE IRQ14 enabled	JP1	closed
	IDE IRQ14 disabled	JP1	open
»	IDE interface buffered	JP3 & JP4/ 2 & 3	closed
	IDE interface non-buffered	JP3 & JP4/ 1 & 2	closed
»	Floppy drive primary address is 3F0h	JP7/pins 1 & 2	closed
	Floppy drive secondary address is 370h	JP7/pins 2 & 3	closed
»	Floppy drive enabled	JP8/pins 2 & 3	closed
	Floppy drive disabled	JP8/pins 1 & 2	closed
»	Floppy drives order is A:, B:	JP9/pins 2 & 3	closed
	Floppy drives order is B:, A:	JP9/pins 1 & 2	closed
»	IDE interface enabled	JP12/pins 2 & 3	closed
	IDE interface disabled	JP12/pins 1 & 2	closed
»	IDE primary address is 1F0h	JP13/pins 1 & 2	closed
	IDE secondary address is 170h	JP13/pins 2 & 3	closed
»	Parallel port is uni-directional	JP26	closed
	Parallel port is bi-directional	JP26	open
»	Game port enabled	JP28	closed
	Game port disabled	JP28	open

SERIAL PORT 1 CONFIGURATION
Address		JP14	JP15
»	3F8h (COM1)	pins 1 & 2 closed	pins 1 & 2 closed
	3E8h (COM3)	pins 2 & 3 closed	pins 1 & 2 closed
	2E8h (COM4)	pins 2 & 3 closed	pins 2 & 3 closed
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed

SERIAL PORT 2 CONFIGURATION
Address		JP10	JP11
»	2F8h (COM2)	pins 1 & 2 closed	pins 2 & 3 closed
	3E8h (COM3)	pins 2 & 3 closed	pins 2 & 3 closed
	2E8h (COM4)	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed

PARALLEL PORT CONFIGURATION
Address		JP5	JP6
»	378h (LPT1)	pins 2 & 3 closed	pins 1 & 2 closed
	278h (LPT2)	pins 1 & 2 closed	pins 2 & 3 closed
	3BCh (LPT3)	pins 2 & 3 closed	pins 2 & 3 closed
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed

SERIAL PORT 1 INTERRUPT SELECTION
IRQ		J6	J7	J8	J9	J10
»	4	open	open	open	pins 1 & 2	open
	3	open	open	open	open	pins 1 & 2
	5	open	open	pins 1 & 2	open	open
	7	open	pins 1 & 2	open	open	open
	9	pins 1 & 2	open	open	open	open
Note: Designated pins are in the closed position.

SERIAL PORT 2 INTERRUPT SELECTION
IRQ		J6	J7	J8	J9	J10
»	3	open	open	open	open	pins 2 & 3
	4	open	open	open	pins 2 & 3	open
	5	open	open	pins 2 & 3	open	open
	7	open	pins 2 & 3	open	open	open
	9	pins 2 & 3	open	open	open	open
Note: Designated pins are in the closed position.

PARALLEL PORT INTERRUPT SELECTION
IRQ		J1	J2	J3	J4	J5
»	7	open	closed	open	open	open
	3	open	open	open	open	closed
	4	open	open	open	closed	open
	5	open	open	closed	open	open
	9	closed	open	open	open	open