EHDI 8302 Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
EHDI 8302
Data bus: 16-bit, ISA
Size: Half-length, half-height card
Hard drives supported: Two IDE (AT) interface drives
Floppy drives supported: None
CONNECTIONS | |
4-pin connector-drive active LED | CN1 |
40-pin IDE (AT) Interface connector | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Hard drive port address is 1F0-1F7h, 3F6-3F7h | JP1 | open |
Hard drive port address is 170-177h, 376-377h | JP1 | closed | |
| » | Gate I/O channel ready is over 12 MHz | JP2 | closed |
Gate I/O channel ready is under 12MHz | JP2 | open | |
| » | Factory configured - do not alter | JP3 | open |
| » | Factory configured - do not alter | JP4 | closed |
MISCELLANEOUS TECHNICAL NOTES |
This controller has no on-board software. |
My Books
