UNIDENTIFIED
SUPER I/O
Data bus: | 16-bit, ISA |
Size: | Half-length, full-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
2-pin connector - Drive active LED | CN1 |
15-pin game port - internal | CN2 |
40-pin IDE(AT) Interface connector | CN3 |
34-pin control cable connector - floppy drive | CN4 |
10-pin serial port (COM2/4) - internal | CN5 |
10-pin serial port (COM1/3) - external | CN6 |
25-pin parallel port (LPT2/3) - external | CN7 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
» | Game port enabled | JP1 | pins 1 & 2 closed |
Game port disabled | JP1 | pins 2 & 3 closed | |
» | Hard drive enabled | JP2 | pins 1 & 2 closed |
Hard drive disabled | JP2 | pins 2 & 3 closed | |
» | Floppy drive enabled | JP3 | pins 1 & 2 closed |
Floppy drive disabled | JP3 | pins 2 & 3 closed |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
» | Serial Port 1 (CN6) is set to COM1 | JP4 | pins 1 & 2 closed |
Serial Port 1 (CN6) is set to COM3 | JP4 | pins 2 & 3 closed | |
» | Serial Port 1 (CN6) enabled | JP5 | pins 1 & 2 closed |
Serial Port 1 (CN6) disabled | JP5 | pins 2 & 3 closed | |
» | Serial Port 2 (CN5) is set to COM2 | JP6 | pins 1 & 2 closed |
Serial Port 2 (CN5) is set to COM4 | JP6 | pins 2 & 3 closed | |
» | Serial Port 2 (CN5) enabled | JP7 | pins 1 & 2 closed |
Serial Port 2 (CN5) disabled | JP7 | pins 2 & 3 closed | |
» | Parallel Port (CN7) is set to LPT2 | JP8 | pins 1 & 2 closed |
Parallel Port (CN7) is set to LPT3 | JP8 | pins 2 & 3 closed | |
» | Parallel Port (CN7) enabled | JP9 | pins 1 & 2 closed |
Parallel Port (CN7) disabled | JP9 | pins 2 & 3 closed | |
» | I/O Channel Ready signal disabled | JP10 | open |
I/O Channel Ready signal enabled | JP10 | closed | |
» | Hard drive controller installation installed | JX1 | pins 1 & 2 closed |
Hard drive controller installation not installed | JX1 | pins 2 & 3 closed | |
» | AT-compatible mode enabled | JX2 | pins 1 & 2 closed |
XT-compatible mode enabled | JX2 | pins 2 & 3 closed | |
» | Hard drive port address is 1F0-1F7, 3F6, 3F7h | JX3 | pins 1 & 2 closed |
Hard drive port address is 170-177, 376, 377h | JX3 | pins 2 & 3 closed | |
» | Floppy drive port address is 3F2-3F5, 3F7, 1F7h | JX4 | pins 1 & 2 closed |
Floppy drive port address is 372-375, 377, 177h | JX4 | pins 2 & 3 closed |