SAI2S13 MULTI I/O PLUS Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Half-length, half-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
25-pin parallel port (LPT1/2) - external	CN1
15-pin game port - internal	CN2
10-pin serial port 1 (COM1/3) - external	CN3
10-pin serial port 2 (COM2/4) - internal	CN4
34-pin control cable connector - floppy drive	CN5
40-pin IDE (AT) Interface connector	CN6
2-pin connector - drive active LED	JP1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Hard drive enabled	J1	pins 1 & 2 closed
	Hard drive disabled	J1	pins 2 & 3 closed
»	Floppy drive enabled	J2	pins 1 & 2 closed
	Floppy drive disabled	J2	pins 2 & 3 closed
»	Serial Port 2 (CN4) enabled	J3	pins 1 & 2 closed
	Serial Port 2 (CN4) disabled	J3	pins 2 & 3 closed
»	Serial Port 2 (CN4) is set to COM2	J4	pins 1 & 2 closed
	Serial Port 2 (CN4) is set to COM4	J4	pins 2 & 3 closed
»	Serial Port 1 (CN3) enabled	J5	pins 1 & 2 closed
	Serial Port 1 (CN3) disabled	J5	pins 2 & 3 closed
»	Serial Port 1 (CN3) is set to COM1	J6	pins 1 & 2 closed
	Serial Port 1 (CN3) is set to COM3	J6	pins 2 & 3 closed
»	Parallel Port (CN1) enabled	J7	pins 1 & 2 closed
	Parallel Port (CN1) disabled	J7	pins 2 & 3 closed
»	Parallel Port (CN1) is set to LPT1	J8	pins 1 & 2 closed
	Parallel Port (CN1) is set to LPT2	J8	pins 2 & 3 closed