UNIDENTIFIED
DLU 260
Data bus: | 16-bit, ISA |
Size: | Half-length, Full-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
25-pin parallel port | CN1 |
9-pin serial port - external | CN2 |
40-pin IDE(AT) interface connector | CN3 |
34-pin control cable connector - floppy drive | CN4 |
Game port | CN5 |
10-pin serial port - internal | CN6 |
4-pin connector - drive active LED | CN7 |
2-pin connector - optional IOCHRDY for IDE | J13 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
» | No other hard drive interface exists | J10 | pins 2 & 3 closed |
Two or more hard drive interfaces exist | J10 | pins 1 & 2 closed | |
» | IDE type AT enabled | J11 | pins 2 & 3 closed |
IDE type XT enabled | J11 | pins 1 & 2 closed | |
» | Game port enabled | J20 | pins 1 & 2 closed |
Game port disabled | J20 | pins 2 & 3 closed |
FLOPPY DRIVE PORT CONFIGURATION | |||
Address | J6 | J7 | |
» | Primary | pins 1 & 2 closed | pins 1 & 2 closed |
Secondary | pins 1 & 2 closed | pins 2 & 3 closed | |
Disabled | pins 2 & 3 closed | n/a |
IDE PORT CONFIGURATION | |||
Address | J8 | J9 | |
» | 1F0h | pins 1 & 2 closed | pins 1 & 2 closed |
1F7h | pins 1 & 2 closed | pins 2 & 3 closed | |
Disabled | pins 2 & 3 closed | n/a |
PARALLEL PORT CONFIGURATION | |||
LPT/Address | J14 | J15 | |
» | LPT1/378h | pins 1 & 2 closed | pins 1 & 2 closed |
LPT2/278h | pins 2 & 3 closed | pins 1 & 2 closed | |
Disabled | n/a | pins 2 & 3 closed |
SERIAL PORT 1 CONFIGURATION | |||
COM/Address | J16 | J17 | |
» | COM1/3F8h | pins 1 & 2 closed | pins 1 & 2 closed |
COM3/3E8h | pins 2 & 3 closed | pins 1 & 2 closed | |
Disabled | n/a | pins 2 & 3 closed |
SERIAL PORT 2 CONFIGURATION | |||
COM/Address | J18 | J19 | |
» | COM2/2F8h | pins 1 & 2 closed | pins 1 & 2 closed |
COM4/2E8h | pins 2 & 3 closed | pins 1 & 2 closed | |
Disabled | n/a | pins 2 & 3 closed |