BI-039B MATE I/O Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Maximum heads/cyl.	8 heads and 1024 cylinders
Special Features	Two serial, one parallel, and one game port

CONNECTIONS
Function	Location
40-pin AT Interface (IDE) control cable connector	CN1
34-pin control cable connector-floppy drive	CN2
16-pin game port-internal	CN3
9-pin serial port (COM2/4)-internal	CN4
9-pin serial port (COM1/3)-external	CN5
25-pin parallel port (LPT1/2)-external	CN6

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	COM2 enabled	JP1	closed
	COM2 disabled	JP1	open
»	COM1 enabled	JP2	closed
	COM1 disabled	JP2	open
»	Floppy drive enabled	JP3	closed
	Floppy drive disabled	JP3	open
»	Hard drive enabled	JP4	closed
	Hard drive disabled	JP4	open
»	Game port enabled	JP5	closed
	Game port disabled	JP5	open

GAME PORT ADDRESS
Address	Jumper JP6	Jumper JP7
Enabled	open	open
3BCh	closed	open
378h	closed	closed
278h	open	closed