PM-510F Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
PM-510F
Data bus: 16-bit, ISA
Size: Half-length, half-height card
Hard drives supported: Two IDE (AT) Interface
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
CONNECTIONS | |
Function | Location |
40-pin IDE (AT) Interface control cable connector | CN1 |
34-pin data cable connector-floppy drive | CN2 |
2-pin connector-drive active LED | CN3 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Hard drive enabled | JP1 | closed |
Hard drive disabled | JP1 | open | |
| » | Floppy drive enabled | JP2 | closed |
Floppy drive disabled | JP2 | open | |
My Books
