IDE/FCD MULTI-I/O Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
IDE/FCD MULTI-I/O
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two AT Interface (IDE) drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
Special features Two serial and one parallel port
CONNECTIONS | |
Function | Location |
25-pin parallel port (LPT1/2)-external | CN1 |
9-pin serial port (COM1/3)-internal | CN2 |
9-pin serial port (COM2/4)-internal | CN3 |
40-pin AT Interface (IDE) control cable connector-internal | CN4 |
34-pin control cable connector-hard drive | CN5 |
2-pin connector-drive active LED | CN6 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy drive enabled | JP1 | pins 1 & 2 closed |
Floppy drive disabled | JP1 | pins 2 & 3 closed | |
| » | Parallel port address is 378h | JP2 | pins 1 & 2 closed |
Parallel port address is 278h | JP2 | pins 2 & 3 closed | |
Parallel port disabled | JP2 | open | |
| » | Serial port 1 (COM1) address is 3F8h | JP3 | pins 1 & 2 closed |
Serial port 1 (COM3) address is 3E8h | JP3 | pins 2 & 3 closed | |
Serial port 1 disabled | JP3 | open | |
| » | Serial port 2 (COM2) address is 2F8h | JP4 | pins 1 & 2 closed |
Serial port 2 (COM4) address is 2E8h | JP4 | pins 2 & 3 closed | |
Serial port 2 disabled | JP4 | open | |
| » | Hard drive enabled | JP5 | pins 1 & 2 closed |
Hard drive disabled | JP5 | pins 2 & 3 closed | |
| » | IRQ14 | JP6 | pins 1 & 2 closed |
IRQ15 | JP6 | pins 2 & 3 closed | |
My Books
