IDE/FLOPPY 765 Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
IDE/FLOPPY 765
Data Bus: | 16-bit ISA |
Size: | Half-length, half-height card |
Hard drives supported: | IDE (AT) drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE (AT) interface connector internal | CN1 |
4-pin connector-drive active LED | CN2 |
34-pin data cable connector-floppy drive | CN3 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy drive enabled | JP1 | closed |
Floppy drive disabled | JP1 | open | |
My Books
