ULTRA24F Hard Disk/Floppy Controller Settings and Configuration
ULTRASTOR CORPORATION
ULTRA24F
Data bus: 32-bit, EISA
Size: Full-length, half-height card
Hard drives supported: Up to seven SCSI devices
Floppy drives supported: Three 360KB, 720KB, 1.2MB, or 1.44MB drives
CONNECTIONS | |
Function | Location |
50-pin SCSI cable connector-internal | CN1 |
50-pin SCSI cable connector-external | CN2 |
34-pin data cable connector | CN3 |
4-pin connector-drive active LED | CN4 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Chassis ground enabled | JP1 | closed |
Chassis ground disabled | JP1 | open | |
| » | Factory configured- Do not alter | JP2 | pins 1 & 2 closed |
| » | Factory configured- Do not alter | JP3 | closed |
| » | Factory configured- Do not alter | JP4 | pins 1 & 2 closed |
| » | Factory configured- Do not alter | JP5 | open |
| » | Factory configured- Do not alter | JP6 | closed |
| » | Floppy drive enabled | JP7 | closed |
Floppy drive disabled | JP7 | open | |
| » | Factory configured- Do not alter | JP8 | pins 1 & 2 closed |
| » | Factory configured- Do not alter | JP9 | pins 2 & 3 closed |
My Books
