ULTRAARRAY-144EZ Hard Disk/Floppy Controller Settings and Configuration

Data bus:	N/A
Size:	5.25" FF, HH
Hard drive supported:	5 SCSI channels
Floppy drives supported:	None

DIAGNOSTIC LED(S)
LED	Status	Function
1	on	a command is being processed by the controller
1	off	no command is being processed by the controller
2	on	indicates a drive failure
2	off	drive is good
3	on	maintenance process is active
3	off	maintenance process is not active
4	on	status update
4	off	no status update

USER CONFIGURABLE SETTINGS
Function	Location	Setting
Active termination for drive channel 0 enabled	JP1/pins 1 & 2	closed
Active termination for drive channel 1 enabled	JP1/pins 3 & 4	closed
Active termination for drive channel 2 enabled	JP1/pins 5 & 6	closed
Active termination for drive channel 3 enabled	JP1/pins 7 & 8	closed
Active termination for drive channel 4 enabled	JP1/pins 9 & 10	closed
Active termination for drive channel 0 enabled	JP1/pins 11 & 12	closed

TERMINATION POWER - JP7
Setting		JP7/pins 1 & 2	JP7/pins 3 & 4
»	TERMPWR supplied by UltraArray-144EZ to itself	closed	open
	TERMPWR supplied by UltraArray-144EZ to TRMPWR pin	closed	closed
	TERMPWR supplied by TRMPWR pin	open	closed

MISCELLANEOUS TECHNICAL NOTES

JP1 & JP7 are located on the PCB at the bottom of the drive. Diagram is not available.