S1365 (Rev. 1.1) Hard Disk/Floppy Controller Settings and Configuration
TYAN COMPUTER CORPORATION
S1365 (Rev. 1.1)
Data bus: | 32-bit PCI |
Size: | Half-length, Full-height card |
Hard drive supported: | Up to fifteen SCSI drives |
Floppy drives supported: | None |
CONNECTIONS | |
Function | Location |
50-pin SCSI connector - internal | H1 |
4-pin connector - drive active LED | J20 |
50-pin SCSI connector - external | SC1 |
68-pin SCSI connector - internal | SC2 |
USER CONFIGURABLE SETTINGS | ||
| Function | Location | Setting |
| SCSI active terminator enable/disable through software | H10 | closed |
| SCSI active terminator not enabled/disabled through software | H10 | open |
| Wide portion of terminator enable/disable through software | H11 | closed |
| Wide portion of terminator not enabled/disabled through software | H11 | open |
| Manual active on-board terminator disabled | JH2/pins 1 & 2 | closed |
| Manual active on-board terminator enabled | JH2/pins 1 & 2 | open |
| Manual active on-board wide portion terminator disabled | JH2/pins 3 & 4 | closed |
| Manual active on-board wide portion terminator enabled | JH2/pins 3 & 4 | open |
PCI INTERRUPT LINE SELECTION | ||
| INT | JH1 | |
| » | A | pins 1 & 2 closed |
| B | pins 3 & 4 closed | |
| C | pins 5 & 6 closed | |
| D | pins 7 & 8 closed | |
My Books
